• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Steel Plates - 30 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalogue excerpts

Steel Plates NIPPON STEEL & SUMITOMO METALhttp://www.nssmc.com/ Nippon Steel & Sumitomo Metal Corporation 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 NIPPON STEEL & SUMITOMO METAL Steel Plates A001en_06_201704f © 2012, 2017 NIPPON STEEL & SUMITOMO METAL CORPORATION NIPPON STEEL & SUMITOMO METAL

 Open the catalogue to page 1

Introduction Increasingly higher functionality and quality are demanded for steel plates. This is a reflection of technological progress in various application fields, as well as diversification of usage environments. Through our total control system and operational technology realized through thorough quality control, excellent equipment, the technology we have cultivated, and our vast experience, we at Nippon Steel & Sumitomo Metal will continue to create products that accurately meet the demands of any field, both qualitatively and quantitatively. Under a new organizational system, we will...

 Open the catalogue to page 2

1. Wide Product Availability / Various Uses We provide a wide product availability including steel plates that satisfy official standards in Japan and overseas, high tensile strength steel for welded structures, abrasion resistant steel, atmospheric corrosion resistant steel, low-temperature service steel, and steel for building, as well as materials that are suitable for a wide variety of uses, from offshore structures (production), line pipes (transport), tanks (storage) and other high-function steel for use in energy fields. In addition, we also accept orders for steel with special specifications,...

 Open the catalogue to page 3

NIPPON STEEL & SUMITOMO METAL AUO liable (G ra des    * For a comparison of the old Nippon Steel specifications and old Sumitomo Metal specifications, please see page 56. Our company manufactures thick steel plates that meet various standards. Products with Nippon Steel & Sumitomo Metal standards are unique to our company. An excerpt of these standards is included in another chapter. We also respond to requests involving standards other than those listed below.

 Open the catalogue to page 4

Authorized Steel Grades by Product Type ■ Steel Plates for Hulls ■ Steel Plates for Low-temperature Service(Ship Building Standards) Ship register Authorized steel grade Ship register Nippon Kaiji Kyokai(NK) ( Nippon Kaiji Kyokai NK) ( Lloyd’ Register of Shipping LR) s ( American Bureau of Shipping ABS) ( Chinese Register of Shipping CR) ※ The approved steel grades vary depending on the classification society. Please contact us for details. ※ Corrosion resistant steel for Cargo Oil Tanker (-RCB, -RCW) ■ Steel Plates for Boilers and Pressure Vessels Society ( American Bureau of Shipping AB) Nippon...

 Open the catalogue to page 5

Manufacturing Process and Quality Control Points Limestone Sintering plant Slab conditioning/ Dimensional inspection Pigiron Coal Coking plant Basic oxygen furnace Blast furnace Continuous reheating furnace Roughing mill Finishing mill Continuous casting Controlled cooling Secondary refining Batch reheating furnace Shearing (roughing cutting) Cooling beds Reheating Shearing (side cutting) Cutting out product plate and test pieces Product inspection/ Marking Shot blasting Shipping Ultrasonic flaw detection Inspection (conditioning) Coating Shot blasting Mechanical testing Thermo-Mechanical Control...

 Open the catalogue to page 6

NIPPON STEEL & SUMITOMO METAL Available Sizes 400 N/mm-class Tensile Strength Steel Plates (As-rolled) \ Width \ (mm) Thickness (mm) I I Standard size range Standard size range For sizes of over 25m in length, please consult us in advance. ^For sizes of over 400mm in thickness, advance consultation is requested. (1) The figures in the table show maximum length (m). (2) For lengths in ( ), advance consultation is requested. (3) The minimum length shall be 3m. (4) For size ranges enclosed with a line, advance consultation is requested. (5) For the applicable plate thicknesses in each standard, refer...

 Open the catalogue to page 7

NIPPON STEEL & SUMITOMO METAL 490 N/mm2-class Tensile Strength Steel Plates (As-rolled) . Available Sizes 490 N/mm2-class Tensile Strength Steel Plates (TMCP:Thermo-Mechanical Control Process) Available Sizes I-1 otHH'    I-1 Standard size range an ar s|ze range    p0r sizes of over 25m in length, please consult us in advance.

 Open the catalogue to page 8

NIPPON STEEL & SUMITOMO METAL Weldable High-tensileStrength SteelPlates: WEL-TEN™ Series 1. Outline of Series and Specifications WEL-TEN™ Series is high tensile and superior weldability steel featuring a rich variety of product categories. It has a wide range of applications, including pressure vessels, oil storage tanks, penstock, bridges, buildings, construction equipment, and industrial equipment. * With respect to the standards in the table above, it is possible to add the following special requirements upon request. © SR guaranteed steel (-SR), ® Lamellar tear-resistant guaranteed steel (-Z35,...

 Open the catalogue to page 9

NIPPON STEEL & SUMITOMO METAL Brand name Remarks: 1) When necessary, alloying elements other than those shown in the tale may be added. 2) Carbon equivalent, Ceq, and weld crack sensitivity, Pcm, are calculated for added elements using the following equation. Ceq=C+Si/24+Mn/6+Ni/40+Cr/5+Mo/4+V/14 (%) PcM=C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B (%) 3) In the bending test, cracks shall not occur in the outside of test piece. The bending test can be eliminated unless otherwise specified. * With respect to the standards in the table above, it is possible to add the following special requirements...

 Open the catalogue to page 10

NIPPON STEEL & SUMITOMO METAL 2. Available Sizes ■ Tensile Strengths 540, 570, 590, 610    i i Standard size range □ Please consult us in advance.

 Open the catalogue to page 11

NIPPON STEEL & SUMITOMO METAL Abrasion-resistant Steel Plates: ABREXTM Series1. Outline of Series and Specifications (ABREX™400, 450, 500, 600) ABREXTM Series is steel with abrasion resistance 2~5 times that of conventional mild steel. It is applied in fields requiring abrasion resistance such as the bucket of shovel loaders, conveyer hoppers, dump truck load carriers, and the blades of bulldozers.

 Open the catalogue to page 12

All Nippon Steel catalogues and technical brochures

  1. COR-TEN

    18 Pages

  2. NSGP

    4 Pages

  3. NSafe

    4 Pages


    6 Pages

  5. ABREX

    12 Pages

  6. UO PIPE

    12 Pages


    25 Pages