w w w . n i p p o n p u l s e . c o m Stepper Motors NPM Nippon Pulse Your Partner in Motion Control w w w . n i p p o n p u l s e . c o m

Nippon Pulse Stepper Motors Terminology Overview Nippon Pulse stepper motors are 2-coil permanent magnet motors and are classified by the following types: PF/PFC Series tin-can stepper PFL Series Linearstep® PR Series hybrid PTM/PTMC Series synchronous Capacitor With reversible synchronous motors (can rotate both clockwise and counterclockwise) the rotor is moved by shifting the phase by 90°. Thus, a synchronous motor requires a capacitor. The capacity depends on motor model, rated voltage, and supply frequency. The capacitor should also withstand a voltage of greater than two times the rated...

Tin-Can Steppers Specifications Stepper Motor Features Constant Voltage Drives This is the simplest, least expensive, and most repeatable method of driving a stepper motor. These types of drives apply a voltage to the winding. The supplied voltage, when applied across the motor winding, can only produce a set current (based on Ohm’s Law). Constant Current Drives This drive method makes it possible to get higher speed performance out of the motor. These types of drives apply a voltage to the winding that is at least Bipolar Drive Unipolar Drive Four leadwires are connected as shown double of the...

Tin-Can Steppers PFCU25 Tin-Can Steppers PF(C)25 PF25 Tin-Can Stepper 8.2 1.5 0 -0.1 1 0± 10 0 -0.01 20 30° Specifications a subsidiary of Nippon Pulse Motor Co., Ltd. Unit PF(C)25-24 Type of Winding Specifications 4.1 (1 Vrms, 1 kHz) Maximum Torque mN·m 20 Destruction Torque mN·m 60 Starting Pulse Rate1* pps 420 or more (with no load) Slewing Pulse Rate1* pps 680 or more (with no load) Operating Temp. Range ˚C -10 to +50 Temperature Rise* ˚C g Gear Ratio, Backlash 55 1/20, 7˚ or less Ω 120 16 122 15 120 16 122 15 Inductance mH 34 4.5 66 8 39 5.5 81 10 Holding Torque* mN·m 8 8 10 10 10 10 12...

Tin-Can Steppers PF35 Tin-Can Steppers PF35T PF35 Tin-Can Stepper 9 20.6 PF35T Tin-Can Stepper 2.2 13 2-Ø3.5 1.5 2-Ø3.5 1.5 0 -0.1 2 0 -0.01 Ø35 42 ±0.2 0.8 Ø2 Ø35 Ø10 0 Ø2 -0.01 50 42 ±0.2 0 Ø10 -0.1 2-R4 15 15 0.8 50 2-R4 0± 15 31 0± 30° 30° 31 (10 ) UL1007 AWG28 Dimensions in mm ) UL1007 AWG28 (1 0 www.nipponpulse.com 1-540-633-1677 Unipolar Excitation Mode* Bipolar Unipolar Bipolar Full step (2-2) Step Angle 15 ±5% 7.5 ±5% Steps Per Revolution* 24 Coil 48 D P Q C D P 12 5 12 5 12 5 12 5 Ω 90 16 100 17 90 16 100 17 Inductance mH 48 8.9 95 14 48 8.9 124 19 Holding Torque mN·m 15 15 19 19 20...

Tin-Can Steppers PFC35TH Tin-Can Steppers PF42 PF42 Tin Can Stepper 11.5 Ø42 0 2.2 0± 1 5 57.5 49.5 ±0.2 21.8 0.8 0 Ø3 -0.01 Ø10 -0.1 14.9 1.5 2- Ø3.5 2-R4 31 30° (1 0) UL1007 AWG26 Dimensions in mm 11.5 www.nipponpulse.com 1-540-633-1677 Nippon Pulse America, Inc. Specifications a subsidiary of Nippon Pulse Motor Co., Ltd. Specification Steps Per Revolution* 48 Rated Voltage V 9 Resistance Ω 37 Inductance mH 14 mN·m 33 Starting Pulse Rate* pps 400 Slewing Pulse Rate* pps 470 Operating Temp. Range ˚C -10 to +50 Temperature Rise* ˚C 70 Operating Temp. Range ˚C +100 Weight g 80 AC·V AC500V (1 min.)...

Tin-Can Steppers PF(C)42T PFC42T Tin-Can Stepper 3 5. 8 ±1 5 0 Ø10-0.1 30° 31 0 Ø42 4.5 3 9 UL1007 AWG28 Dimensions in mm (10 www.nipponpulse.com 1-540-633-1677 Nippon Pulse America, Inc. UL1007 AWG28 ) UL1007 AWG26 1 0 Ø3 -0.01 0 Ø10 -0.1 12 .4 18 0) 14.9 0.8 30° 9 (10 ) 1 Ø42 Ø42 4 4.5 14.9 0.8 1.5 31 0± 15 31 0± 12. 18 2-Ø3.5 0 Ø3 -0.01 0 2-R4 0 Ø10 -0.1 2.2 Ø3 -0.01 57.5 49.5 ±0.2 15.9 0.8 (1 15 5.8 30° 21.8 1.5 1.5 57.5 11.5 2-Ø 3.5 49.5±0.2 2-R 4 15.9 2-Ø3.5 2-R4 PF42T Tin-Can Stepper PFC42H Tin-Can Stepper 57.5 PFC42H Ø49.5 ±0.2 Tin-Can Steppers a subsidiary of Nippon Pulse Motor Co.,...

PF(C)55 PFC55 Tin-Can Stepper 25 18.5 2-Ø3.4 2-Ø4.35 66.7±0.2 30° 11 0± 31 2.9 9 4.5 31 (1 0± 15 UL1007,AWG24 26 1.6 Ø55 Ø55 30° 15 .3 18 .5 0) 2.9 0 Ø11.13 -0.05 0 Ø11.13 -0.05 0 Ø6.345 -0.01 76.2 66.7±0.2 18.5 2-R10 15 11 PFC55H Tin-Can Stepper 1.6 2.9 0 Ø6.345-0.01 2-R10 Tin-Can Steppers PFC55H 76.2 Tin-Can Steppers Dimensions in mm 4.5 2.9 9 UL1007 AWG24 (1 0 a subsidiary of Nippon Pulse Motor Co., Ltd. ) www.nipponpulse.com 1-540-633-1677 Nippon Pulse America, Inc. 15 .3 18 .5 Dimensions in mm Nippon Pulse America, Inc. Specifications a subsidiary of Nippon Pulse Motor Co., Ltd. Specification...

Tin-Can Steppers Specifications PF(C)25 w/P Gearhead PF(C)42/42H/42T w/H Gearhead Nippon Pulse LINEARSTEP® Motors PF25 Tin-Can Stepper with Gearhead (P Type) 2 0 -0.02 11.3 8 2.5 Ø 25 2- 7 MAX. Ø 25.6 Ø3 Ø6 6 ±0.2 0 -0.1 31 ±0.2 A tin-can linear actuator, the PFL series (LINEARSTEP®) is designed to provide a simple system at a fraction of the cost of a conventional rotary stepper motor. Offered in diameters of 25mm and 35mm, the LINEARSTEP® series can also be ordered with one of three pitches on the lead thread screw (0.48mm, 0.96mm, and 1.2mm). The LINEARSTEP series comes with either a bipolar...

Linear Stepper Motors Tin-Can Steppers PFCL25 Linear Stepper Motors Tin-Can Steppers PFL35T PFL35T-48 LINEARSTEP® *Overall length 16.5 4.5 2-Ø3.5 1.6 *Effective stroke (2) Seat between rotor (Manual operation section) 5 2 Ø8 Ø35 A Ø5 0 Ø15-0.1 50 42 ±0.2 Tip (M3 depth 4) 3.5 1.6 Ø15 2-R4 A' Slit width: 1.1 31 01 ± 5 Threaded shaft 30° Slit sectional view (10 ) UL1007 AWG28 2.9 Ø4 *When the effective stroke is 30mm, the total length will be 60mm. *When the effective stroke is 60mm, the total length will be 90mm. Dimensions in mm www.nipponpulse.com 1-540-633-1677 Nippon Pulse America, Inc. a subsidiary...