PME - Electrical pumps - NIKE HYDRAULICS - #1

Text version of the page

www.nikehydraulics.se Industrial hydraulics PME - Electrical pumps NIKE electric hydraulic pumps are reliable, versatile and easy to use. They are suitable for many different applications. All pumps have double-speed operation with automatic switching between high and low pressure at 2 MPa - 6 MPa depending on the pump type. The low-pressure unit is a gear pump that gives a high flow up to the switching pressure. The high-pressure unit is a single or double-piston pump. • built-in safety valve to prevent overloading. • vented tank and intake filter. • level glass for checking oil level. • 2 m power cord with earthed plug (2000-series). • 2 m power cord without plug (4000-series). • pressure gauge port. • carrying handle for ease of transport. • mounting hole in base for permanent installation, plus rubber feet. Description of valve alternatives: ADV - Automatic release valve. Oil returns to tank when motor is switched off. The pressure in the tool then drops and the tool returns automatically. For crimping, cutting or press tools that are used in high-frequency applications. Not for lifting applications! MRV - Manual release valve. Suitable when you want to maintain the pressure in the tool for an extended period and have controlled release. Recommended for use of example with tools for cable crimping or cutting. AP - Adapter plate. This pump has no valve, but simply a connecting plate with pressure and return connections. MLS - With lever valve for single-acting tool/cylinder. MLD - With lever valve for double-acting tool/cylinder. SS - With solenoid valve for single-acting tool/cylinder (24 V DC). Remote control TRC230-24 or external input control is needed. SD - With solenoid valve for double-acting tool/cylinder (24 V DC). Remote control TRC230-24 or external input control is needed. PME70-2030ADV and PME70-2030MRV are equipped with foot actuated pedal for on/off control. All other models have a start/stop button placed on the motor. Manometer The pumps can be equipped with a pressure gauge together with a gauge adapter. We always recommend the use of NIKE HYDRAULICS original parts: pressure gauge AMT801 and gauge adapter AAM14. Data sheet