See other catalogues for
NIKE HYDRAULICS
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Valves | | |
| | | |
| | | Pressure regulating valves | | |
| | | Directional valves | | |
| | | |
| | | |
| | | Description | | VR42 80/800 | | VRH43 80/800 | | Description | | VR30 70/700 | | VRF31 70/700 | | VR150* 150/1500 | | |
| | | | |
| | | Max working pressure Mpa/bar | | |
| | | Max working pressure Mpa/bar Built-in holding function | | |
| | | |
| | | |
| | | |
| | | Adjustable ^QMPa' Adjustable1) | | |
| | | |
| | | |
| | | o J J | | |
| | | AB | | |
| | | 3 | | 3 | | |
| | | 3 | | |
| | | |
| | | | |
| | | |
| | | |
| | | X | | |
| | | . TI | | |
| | | p||r .JL, | | |
| | | |
| | | ÏÏ1 | | |
| | | |
| | | G 1/4" | | |
| | | vr42 | | |
| | | G 1/4" | | |
| | | |
| | | |
| | | g 1/4" | | |
| | | 143 | | |
| | | | | |
| | | | |
| | | 120 | | |
| | | |
| | | |
| | | G 1/4" | | |
| | | |
| | | G 1/4" | | |
| | | |
| | | \g 1/4" | | |
| | | |
| | | vr30 | | |
| | | |
| | | |
| | | 43 | | |
| | | |
| | | G 1/4" | | |
| | | | | |
| | | |
| | | 130.5 | | |
| | | | | |
| | | | G 1/2" | |
| | | | |
| | | 60 | | |
| | | |
| | | vrh43 | | |
| | | |
| | | |
| | | 60 | | |
| | | |
| | | 95 | | |
| | | |
| | | |
| | | * - Designed to fit hand pump series PHS. 1) - Adjustable between 50 -150 MPa. | | |
| | | |
| | | Safety valves | | |
| | | |
| | | a | | |
| | | |
| | | 38,5 | | |
| | | |
| | | B | | |
| | | |
| | | ■ Preset pressure at 95 or 105 MPa. ■ Prevents your hydraulic system from pressure overload. A safety valve is a useful component for preventing excessive pressures in a hydraulic system. These valves are primarily designed for use on the return side of double acting hydraulic cylinders, and are preset at the factory for maximum pressure as shown in the table. The preset pressure must NOT be changed. If the preset pressure is exceeded then oil will leak out. You must therefore ensure that the user us protected against pressurised oil. Always install the safety valve in an enclosure or protected area. | | |
| | | G 1/4" | | |
| | | |
| | | | | | | | | | | | Description | Preset pressure | A | B | | | | | MPa | int. thread | mm | | | | VS14-90 | 90 - 95 | G 1/4" | 42 | | | | VS14-100 | 100 - 105 | G 1/4" | 42 | | | | VS38-90 | 90 - 95 | NPT 3/8" | 46 | | | | VS38-100 | 100 - 105 | NPT 3/8" | 46 | | | | | | | | | | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |