TOLCO Fire Protection Catalog - 2 / 80 Pages

Catalog Forward
This catalog has been created with an acute awareness
of the field problems of the piping contractor.
We have sought and received input from engineers,
installers, field inspectors and others closely involved
with the installation of piping systems. This is where
needs are discovered, and where products and services
are genuinely tested.
TOLCO® is proud to present a complete and versatile
line of pipe hangers and related products. The
TOLCO line has been methodically developed to
effectively address support problems in the commercial
and industrial piping fields.
A thorough knowledge of our customers’ needs and
problems was no less important than the development
of our manufacturing skills in the emergency of
TOLCO as a leader in the pipe hanger industry. Our
people are equipped to respond quickly to your product
and service needs on both standard items and
specialized metal fabrication.
Custom Fabrication
We have expanded our manufacturing capacity in
response to the growing demand for customized
metal fabrication and special hangers. When some
detail of construction or piping arrangement makes it
necessary to deviate from standard types of hangers,
TOLCO is equipped to furnish hangers and supports
of any required type. These products combine proven
designs and standards with new innovations that
enhance their utility.
Approvals and Specifications
TOLCO, as a member of the American Pipe Fittings
Association, is cooperating with engineers and architects
in the preparation of specifications covering
hanger requirements and the interpretation of applicable
piping safety codes.
All TOLCO products are carefully manufactured
to meed the highest standards in the industry. All
products, as a minimum conform to Manufacturers
Standardization Society MSS-SP-58, and to the allowable
stresses specified in the ANSI B31.1 code for
pressure piping.
Many TOLCO Products are also listed, approved or
conform to:
Underwriter’s Laboratories UL-203
Factory Mutual Engineering
National Fire Protection Association NFPA-13,
NFPA-13R, NFPA-13D and NFPA-24
Federal Specification WW-H-171EE
Warning
Pipe hanger products included in this catalog are
intended for installation and service only as described
herein.
We are aware that these products have been used
(often without incident) for purposes and in ways other
than those for which they were designed and manufactured.
Examples of which are: use of products
as erection tools; use of beam clamps on a beam
not specified for them; use of concrete inserts as an
anchor for pulling pipe to proper elevation; suspension
of one clevis hanger under another resulting in cumulative
load greater than specified capability. In such
cases of misapplication or improper use, we cannot
be held responsible for injuries or property damage.
TOLCO pipe hanger products are carefully designed
and manufactured to industry standards. Care should
be exercised by installers and end users to install, use
and maintain these products properly to avoid any
possible on-the-job accidents.
Designs
Product design and specifications are subject to
change without notice.
Finishes
Most hangers are available in: stainless steel, electro-
galvanized or hot-dipped galvanized. Other
special finishes are available upon request. Items
ordered hot-dip galvanized may be supplied with electro-
galvanized threaded components unless otherwise
specified. If you require a finish not listed in the
product data of a specific hanger, please consult
our factory.
Index
Figure numbers in this catalog are in numerical order.
Terms and Conditions of Sale
For conditions and terms of sale, please consult our
current price guide.
Main Office/Manufacturing Facility • 1375 Sampson Ave. • Corona, CA 92870 • Ph: 951.737.5599 • Fax: 951.737.0330
Customer Service • 800.786.5266
www.tolco.com
www.tolco.com
Revision 12/06/2007

TOLCO Fire Protection Catalog
  1. P. 1

    TOLCO® Fire Protection Support SystemsPipe HangersSupportsSeismic BracingUL ListedFM Approvedfor Fire SprinklerInstallations®
  2. P. 2

  3. P. 3

    OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330CUSTOMER SERVICE •...
  4. P. 4

    OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330CUSTOMER SERVICE •...
  5. P. 5

    OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330CUSTOMER SERVICE •...
  6. P. 6

    OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330CUSTOMER SERVICE •...
  7. P. 7

    OFFICE/MANUFACTURING FACILITY • 1375 SAMPSON AVE. • CORONA, CA 92879 • PH: 951.737.5599 • FAX: 951.737.0330CUSTOMER SERVICE •...
  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

Text version

All NIBCO catalogues and technical brochures

  1. T-585-70-66-HC

    1 Pages

    En
  2. G-595-Y-66

    1 Pages

    En
  3. T-580-A

    1 Pages

    En
  4. S-FP-600A-LF

    1 Pages

    En
  5. TM-585-70-66-AP

    1 Pages

    En
  6. S-FP-600A

    1 Pages

    En
  7. S-FP-600-AD

    1 Pages

    En
  8. NIBCOFPCat

    56 Pages

    En
  9. coppercat

    56 Pages

    En
  10. ChemVlvGuide

    44 Pages

    En
  11. ThermoPlastic

    44 Pages

    En
  12. ChemFittingGuide

    48 Pages

    En
  13. BFVCatalog

    64 Pages

    En
  14. BronzeIron

    124 Pages

    En
  15. BlazeMasterCatalog

    28 Pages

    En
  16. BallValve

    116 Pages

    En
  17. actuationcat

    20 Pages

    En
  18. Ball Valve Catalog

    116 Pages

    En
  19. Actuation Catalog

    20 Pages

    En
  20. DURA-PEX® Catalog

    44 Pages

    En