Text version of the page

Model 1100S Local Rate Indicator/Totalizer

Model 1100S Indicator Totalizer Spec Sheet - 23328 Description

The Model 1100S is a two-wire loop powered rate indicator/totalizer/signal transmitter for use with strain gage Target inline, insertion or sanitary flowmeters.The Model 1100S provides a 4-20 mA linear loop signal that is proportional to flow rate squared.The Model 1100S can be integrally mounted or remote mounted up to 50 ft.

T ec hnical Inf ormation

Functional Specifications

Ambient Temperature14° to 140°F (-10° to 60°C) Power Input18 to 36 VDC /memory battery backup (2 - wire)Load Impedance380 ohm @ 24 VDC supply/665 ohm @ 36 VDC supply Outputs4-20 mA DC proportional to flow rate squared 4 mA represents zero flow and 20 mA is full-scale flow DisplayTwo Lines, simultaneous rate & total KeypadFour button process programming and calibration Low Flow CutoffFactory set based on flowmeter turndown Response Time0.1 sec undamped

Performance Specifications

Accuracy+ 0.15% full scale Repeatability+ 0.15% of point Linearity+ 0.07% full scale Resolution+ 0.02% full scale Enclosure ProtectionNEMA 4/IP 66Enclosure ApprovalsFM, CSA Class I, Groups B, C, DClass II, Groups E, F, G EEx d IIC

Physical Specifications

Materials of Construction CasePolyester coated aluminumElectrical Connection
3 /
4 ”FNPT

Dimensions

(inch)Remote mount shown.Integral mount does not have two
5 /
16 ”mounting ears.
60037SK19960037SK199 Figure 1Figure 2

Or dering Inf ormation

Specify model number, remote or integral mounting and type of output at the time of ordering.
SIT-A Rev. A 2002 Venture Measurement 05/02All rights reserved. All data subject to change without notice. 1
[864] 574-3327 [800] 778-9251 Fax: [864] 574.8063 www.aaliant.com sales@aaliant.com