Text version of the page

Model 1060 Microprocessor Transmitter

Model 1060 Microprocessor Transmitter Spec Sheet - 23328 Description

The Model 1060 is a three-wire microprocessor-based signal transmitter for use with the strain gage Target inline, insertion or sanitary flowmeters.The Model 1060 standard outputs are a 4-20 mA analog and 0-1000 Hz digital output signals that are proportional to flow rate.RS 232 serial communications allow communication between the Model 1060 and a PC.The Model 1060 can be integrally mounted or remote mounted up to 100 ft.

T ec hnical Inf ormation

Functional Specifications Performance Specifications

Ambient Temperature32° to 140°F (0° to 60°C) Power Input16 to 30 VDC (3 - wire) Load Input Impedance600 ohm @ 24 VDC supply/400 ohm @ 12 VDC supply Outputs4-20 mA DC isolated4 mA represents zero flow and 20 mA is full scale flow 0-1000 Hz square wave 50% duty cycle 12 VDC output proportional to flow rate CommunicationsRS 232 DisplayNone Low Flow CutoffFactory set based on flowmeter turndown Response Time0.1 sec std.undamped Accuracy0.02% of rate Repeatability0.01% of rate Enclosure ProtectionNEMA 4X/IP 66Enclosure ApprovalsFM, CSA Class I, Groups B,C,DClass II, Groups E, F,G EEx d IIC

Physical Specifications

Materials of Construction CasePolyester coated aluminumElectrical Connection
3 /
4 ”FNPT

Dimensions

(inch)
60037SK155 Figure 1Figure 2

Or dering Inf ormation

Specify model number, remote or integral mounting and type of output at the time of ordering.
MCP-A Rev. A 2002 Venture Measurement 05/02All rights reserved. All data subject to change without notice. 1
[864] 574-3327 [800] 778-9251 Fax: [864] 574.8063 www.aaliant.com sales@aaliant.com