Text version of the page

Model 1050 Strain Gage Transmitter

Model 1050 Strain Gage Transmitter Spec Sheet - 23328 Description

The Model 1050 is a three-wire signal transmitter for use with the strain gage Target inline, insertion or sanitary flowmeters.The Model 1050 standard outputs are a 4-20 mA analog and 0-1000 Hz digital output signals that are proportional to flow rate.The Model 1050 can be integrally mounted or remote mounted up to 100 ft.

T ec hnical Inf ormation

Functional Specifications

Ambient Temperature32° to 140°F (0° to 60°C) Power Input12 to 36 VDC Load Impedance600 ohm @ 24 VDC supply Outputs4-20 mA DC (other outputs available)4 mA represents zero flow and 20 mA is full-scale flow 0 - 1000 Hz square wave DisplayNone Low Flow CutoffFactory set based on flowmeter turndown Response Time0.1 sec std.UndampedFor faster response times, consult factory.

Performance Specifications

Accuracy+ 0.1% full scale Repeatability+ 0.25% of point Enclosure ProtectionNEMA 4X/IP 66Agency ApprovalsFM, CSA Class I, Groups B,C,DClass II, Groups E, F,G, EEx d IIC

Physical Specifications

Materials of Construction CasePolyester coated aluminumElectrical Connection
3 /
4 ”FNPT

Dimensions

(inch)
60037SK155 Figure 1Figure 2

Or dering Inf ormation

Specify model number, remote or integral mounting and type of output at the time of ordering.
SGT-A Rev. A 2002 Venture Measurement 05/02All rights reserved. All data subject to change without notice. 1
[864] 574-3327 [800] 778-9251 Fax: [864] 574.8063 www.aaliant.com sales@aaliant.com