Air Knives
26Pages

{{requestButtons}}

Catalog excerpts

Air Knives - 1

SILENT X-STREAMTM AIR BLADETM AIR KNIFE SILENT X-STREAMTM AIR BLADETM AIR KNIFE Blowoff, clean, cool and dry with this quiet, sharp and strong focused curtain of air SMART N CLEVER MORE THAN INTELLIGENT TM Model 10006X Silent X-StreamTM Air Blade Air Knife cleans a small conveyor of dust and debris. WHAT ARE THEY - REASONS TO USE System payback on compressed air savings can be as soon as a few weeks in some applications. The Silent X-Stream™ Air Blade™ Air Knife comes in three versions: Gold Anodized Aluminum for most applications, Hard Anodized aluminum for abrasive environments or where material may come in contact and tend to wear against the air knife, and stainless steel for high temperature and corrosive environments. NOTE: Plastic shims can wear out quickly in Air Knives if the air is not clean. Nex Flow™ uses ONLY stainless steel shims. Available in Hard Anodized aluminum for abrasive environments or where material may come in contact with the air knife. No moving 4 parts - Gold Anodized aluminum, Hard Anodized aluminum or stainless steel. 4 Compact design, simple, lightweight and portable. 4 across entire length of Air Knife. Full flow - Air 4ends and back. Air inlets at 4 not electricity. Driven by air 4 Replaces drilled pipe and open jets or nozzles used for blowoff, cleaning, drying and cooling. 4 amplification. High airflow 4 no electricity or explosion hazard. Instant on-off, SILENT X-STREAMTM AIR BLADETM AIR KNIFE BENEFITS: 4in difficult environments than competitive Longer life models. 4 Lower compressed air consumption than drilled pipe or rows of open jets and nozzles. 4 end to end for continuous airflow. Can be placed 4 free with output easily controlled, safe to Maintenance use. TM SILENT X-STREAM AIR BLADE AIR KNIFE ADVANTAGES OVER BLOWERS: 4 Compact design, simple, lightweight and portable. 4 not electricity for safety. Driven by air, 4 No moving parts - Hence safer and maintenance free. 4 levels at 69 dBA and less with smaller space. Lower noise Nex Flow™ Air Products Corp. 10520 Yonge Street, Unit 35B-220 Richmond Hill, ON, Canada, L4C 3C7 Tel: +1-416-410-1313 Fax: +1-416-410-180 or +1-716-626-3001 The Silent X-Stream™ Air Blade™ Air Knife produces a “laminar” flow of air along its length using the ”Coanda” effect which “entrains” a large volume of air from the surrounding area along with a small amount of compressed air from the X-Stream™ Air Blade™ Air Knife to produce an output flow up to 40 times. SILENT X-STREAMTM AIR BLADETM AIR KNIFE FEATURES: The Silent X-Stream™ Air Blade™ Air Knife is easy to mount and maintain, reducing both compressed air consumption and noise levels. It is the most efficient design yet achieved in Air Knife blow off technology in reducing noise levels and air consumption yet providing the optim

Open the catalog to page 1
Air Knives - 2

SILENT X-STREAMTM AIR BLADETM AIR KNIFE SILENT X-STREAM ™ AIR BLADE™ AIR KNIFE APPLICATIONS: 4 sheet in strip mills Cleaning of steel 4 Parts drying 4 Cleaning or drying web processes. 4 and blowoff Pre-paint drying 4 Scrap removal 4 Parts cooling 4 cooling Circuit board 4 Use for environment separation with air curtain effect 4 for filling Opening bags 4 Sheet separation Coolant is blown off of an engine block using three Model 10012X - 12” Silent X-StreamTM Air BladeTM Air Knives SILENT X-STREAM™ AIR BLADE™ AIR KNIFE VERSES OTHER BLOWOFF PRODUCTS: Drilled Pipe - Typically drilled pipe...

Open the catalog to page 2
Air Knives - 3

NEX FLOWTM SILENT X-STREAMTM AIR BLADE WORKS: TM SILENT X-STREAMTM AIR BLADETM AIR KNIFE Silent X-Stream Air Blade Air Knife - Compressed air enters the Air Knife at the rear (or end) ports at (A). Air is entrained at point (B) and (D) by the compressed air stream that leaves the Air Knife from a small gap at point (C). The entrained air follows the profile that directs the airflow in a perfect straight line to create a uniform sheet of air along the entire length of the Air BladeTM Air Knife. The amplified air stream maximizes velocity and force is maintained as a well defined sheet of...

Open the catalog to page 3
Air Knives - 4

^NEX FLOW™ SILENT X-STREAM™ AIR BLADE™ AIR KNIFEDIMENSION TABLE OF SILENT X-STREAMtm AIR BLADE™ AIR KNIFE - GOLD ANODIZED ALUMINUM PART NO. (Stainless Steel) NOTE: For sizes 48" and longer there is a third rear inlet port in the middle, 1/4" NPT on same level as the other two rear inlet ports. USE OF SHIMS: Nex Flow™ uses ONLY stainless steel shims in their Air Knife products as plastic shims wear out over time and require replacement, even with relatively clean air systems. Stainless steel shims are .002" (.050 mm). In most applications this is adequate. However, velocity and force can be...

Open the catalog to page 4
Air Knives - 5

^NEX FLOW™ SILENT X-STREAM™ AIR BLADE™ AIR KNIFEHARD ANODIZED SILENT X-STREAM™ AIR BLADE™ AIR KNIFE Blowoff, clean, cool and dry with this quietly in sticky, abrasive environments. SMART N CLEVER™ MORE THAN INTELLIGENT HARD ANODIZED SILENT X-STREAM™ AIR BLADE™ AIR KNIFE FEATURES: ► No moving parts - Gold Anodized aluminum, Hard Anodized aluminum or stainless steel. ► Compact design, simple, lightweight and portable. ► Full flow-Air across entire length of Air Knife. ► Airinletsatends and back. ► Drivenbyair not electricity. ► Replaces drilled pipe and open jets or nozzles used for blowoff,...

Open the catalog to page 5
Air Knives - 6

^NEX FLOW™ Mounting and holding systems are available for the X-stream Air Blade Air Knife. Fully flexible positioning. See Accessories. SILENT X-STREAM™ AIR BLADE™ AIR KNIFEDIMENSION TABLE OF SILENT X-STREAMtm AIR BLADE™ AIR KNIFE - HARD ANODIZED ALUMINUM PART NO. (Stainless Steel) NOTE: For sizes 48" and longer there is a third rear inlet port in the middle, 1/4" NPT on same level as the other two rear inlet ports. US E OF S H I MS: Nex Flow™ uses ONLY stainless steel shims in their Air Knife products as plastic shims wear out over time and require replacement, even with relatively...

Open the catalog to page 6

All Nex Flow Air Products Corp. catalogs and technical brochures

  1. Nexflow Catalog

    188 Pages

  2. Mini Coolers

    2 Pages

  3. Air Jets

    18 Pages

  4. STREAM VAC

    8 Pages

  5. Accessories

    13 Pages

  6. nexflow-ebook

    174 Pages

  7. Tool cooling

    4 Pages

  8. Vortex tubes

    9 Pages

  9. Air Jets

    4 Pages

  10. Tool Cooling

    4 Pages

  11. Panel Cooling

    16 Pages

  12. Air Amplifier

    13 Pages

Archived catalogs