Catalytic Flammable Gas Sensors NP-30SH - NEMOTO - #1

Text version of the page

NEMOTOTECH S.r.l. – 20010 Cornaredo (MI) ITALY Via Legnano, 2 – Tel.+39.02.93544190 – Fax +39 .02. 93540347 C.F. e P. IVA (VAT) IT-06188920968 – CAPITAL EURO 20.000,00 – Website: www.nemototech.it – E-mail: info@nemototech.it TECHNICAL INFORMATION SHEET: NEMOTO NP-30SH Single Header Pellistor Gas Sensor General Description The Nemoto NP-30SH is a catalytic (pellistor) type flammable gas sensor supplied as a matched pair of pellistor elements mounted on a single header and protected by a stainless steel enclosure. The sensor detects and measures the presence of flammable gases and vapours in air, in the range 0- 100% of the Lower Explosive Limit (LEL) of the gas or vapour being measured. Designed as a lower cost alternative to the twin-header NP-30 device, the NP-30SH may be used as the sensing platform in fixed flammable gas detection systems. The NP-30SH exhibits excellent long term zero and sensitivity stability and a high level of resistance to catalytic poisons. The highly automated manufacturing procedure employed by Nemoto results in a repeatable reliable sensor which, unlike similar devices, requires no trimming resistor to enable the detector to be matched with a compensator. Nemoto has a policy of continuous development and improvement of its products. As such the specification for the device outlined in the data sheet may be changed without notice Specifications Recommended Voltage: 2.0V +/- 0.1V Current Drawn: 300 +/- 20mA Zero Offset: 0mV +/- 30mV Minimum Gas Sensitivity: 20mV/% CH4/Air Standard Range: 0-100% LEL Accuracy: +/- 1%LEL(CH4) Maximum Long Term Drift: Span: < +/- 5% Signal / 3 Months Zero: <+/- ½ mV/Month Response Time: T50: 3 sec T90: 8 sec Recommended Circuit: Note: The value R1 is arbitrary, since the function of R1 is to balance the bridge. 1K
is suggested. Temperature Range: -20°C to +70°C Temperature Drift: (-20°C to +70°C) Zero: < +/- 2%LEL Humidity: 0-100%RH, non-condensing Humidity Response: +/- 2%LEL Linearity: Effectively Linear to 100%LEL (to within 5%) Test data on drift, poisoning, temperature performance, linearity will be available on the Characterisation Document NP-30SH-CD.doc ds-np-30sh.doc, issue 2, Apr 2009