Catalytic Flammable Gas Sensors NP-30 - NEMOTO - #1

Text version of the page

NEMOTOTECH S.r.l. – 20010 Cornaredo (MI) ITALY Via Legnano, 2 – Tel.+39.02.93544190 – Fax +39 .02. 93540347 C.F. e P. IVA (VAT) 03231490966 – CAPITAL . 36.000 EU – Website: www.nemototech.it – E-mail: info@nemototech.it TECHNICAL INFORMATION SHEET: NEMOTO NP-30 Pellistor Gas Sensor General Description The Nemoto NP-30 is a catalytic (pellistor) type flammable gas sensor supplied as a matched pair of elements mounted on TO4 size headers and protected by a metal can. The sensor detects and measures the presence of flammable gases and vapours in air, in the range 0- 100% of the Lower Explosive Limit (LEL) of the gas or vapour being measured. Designed as a sensing platform for use in fixed flammable gas detection systems, the NP-30 exhibits excellent long term zero and sensitivity stability and a high level of resistance to catalytic poisons. The device is compatible with a wide range of commercially available Gas Detection Systems and remote flammable gas detection heads. The highly automated manufacturing procedure employed by Nemoto results in a repeatable reliable sensor which, unlike similar devices, requires no trimming resistor to enable the detector to be matched with a compensator. Specifications Recommended Voltage: 2.0V +/- 0.1V Current Drawn: 300 +/- 20mA Zero Offset: 0mV +/- 25mV Minimum Sensitivity: 20mV/% CH4/Air Range: 0-100% LEL Accuracy: +/- 1%LEL(CH4) Maximum Long Term Drift: Span: < +/- 1% Signal/Month Zero: <+/- ½ mV/Month Response Time: T50: 3 sec T90: 8 sec Recommended Circuit: Note: The value R1 is arbitrary, since the function of R1 is to balance the bridge. 1K
is suggested. Temperature Range: -20°C to +70°C Temperature Drift: (-20°C to +70°C) Zero: < +/- 2%LEL Humidity: 0-100%RH, non-condensing Humidity Response: +/- 1%LEL Linearity: Effectively Linear to 60%LEL Test data on drift, poisoning, temperature performance, linearity are available on the Characterisation Document. Nemoto has a policy of continuous development and improvement of its products. As such the specification for the device outlined in the data sheet may be changed without notice ds-np30.doc, issue 6, May 2008