GIII-C - NEDAP Industrial Identification - #1

Text version of the page

Change without prior notice, version 2.1 Nedap N.V. P.O. Box 103 NL-7140 AC Groenlo GIII-C The GIII-C is a powerful RFID reader suitable for industrial applications where 120 kHz Nedap and 125 kHz EM 4102 based transponders should be identified. Key benefits Compact industrial design Excellent performance Parallel antenna connection Integrated sensor input & relay output Integrated RS232 interface Open industry interfaces Identification of NEDAP and EM transponders Easy installation Compact industrial design The GIII-C reader has a compact design. Invulnerability to environmental disturbances is warranted due to the equipment s industrial design. The GIIIC s design is in accordance with the CE and EMC regulations. Excellent performance The GIII-C is characterised by an excellent reading performance in combination with NEDAP RFID antennas. The GIII-C has the possibility for two parallel antenna connections to the reader. Integrated I/O for sensor input and relay output Participation in several standardised industrial sensor and actor networks is one of the reader s unique features. The sensor input (also called No-read input) is available to indicate a no-read situation. This input can also be applied for general purposes or event synchronisation. The GIII-C has a relay output and an optocoupler output. The outputs are deactivated when no tag is identified and Optional the free programmable cross table feature for output control is supported. In this way the reader can operate stand-alone and on-line communication with the host system is not required. Integrated RS232 interface and optional open industry interfaces Communication to the host system e.g. a PC or PLC can be accomplished by all common interfaces. Standard the RS232 interface is integrated for host communication. Optional a communication board can be placed to support other interfaces like RS422, Profibus DP, TCP/IP (Ethernet) and Multidrop. In a Multidrop Master/Slave network up to 15 GIII-C slaves can be connected. As slave the GIII-C can be applied, however as master a Supergis III is required. Identification The GIII-C is able to identify all 120 kHz NEDAP and 125 kHz EM 4102 based or compatible transponders offering you freedom in tag selection, in combination with the reliable identification of the Nedap reader and antenna equipment. Easy installation The GIII has a housing suited for mounting on industrial rail into a central enclosure. Furthermore the reader can also be mounted by using the chassis mounting holes. The connectors offer quick and easy installation.