FS110 - NEDAP Industrial Identification - #1

Text version of the page

Change without prior notice version 2.1 Nedap N.V. P.O. Box 103 NL-7140 AC Groenlo FS110 The Nedap field strength indicator (FS110) can be used to detect the field strength of the detection antenna. The field strength indicator can be used to adjust the RFID antenna. The Nedap FS110 is designed to measure the field strength of the RFID detection antenna. The FS110 can be applied to measure the field strength and based on this information to adjust the antenna when no standard antenna adjustment is available or sufficient. This is the case in applications where readers are mounted centrally and the AB320 is applied to extend the cabling distance between reader and antenna. Furthermore the FS110 can also be applied when customised single-coil antennas are used. The antenna can be adjusted based on the maximum field strength indicated on the FS110. In this way detection range of the antenna will be optimal. The FS110 needs no battery or any other means of power supply. It draws its energy form the radiated filed of the antenna. The FS110 is suitable for 120 kHz systems. Remarks The FS110 is only an indicator for the field strength and not an indication for the detection distance. Disturbance of the card signal cannot been measured. If the needle of the FS110 alters (FS110 not moved) there can be also another antenna in the neighbourhood which interference with the actual antenna. (Can be solved by synchronisation of both antennas).