LATCHING REVERSIBLE SOLENOIDS - NAFSA - #1

Text version of the page

NAFSA reserves the right to any modification N A F S A NA S A Protection rate: IP00 EN60529 Insulation class: E (120ºC) Standard voltage: from 6 to 12 Vdc Under demand voltage: contact Standard stroke "s": 5mm Coil resistance at 20ºC: 8 Ohm Initial force: 1,5 N Holding force: 6N Plunger weight: 5 gr Solenoid weight: 40 gr 9.1 Electroimanes de accionamiento NAFSA S.L. -(www.nafsa.es) -Phone: +34 94 453 10 61-Fax: +34 94 625 01 51 -E-mail: elec@nafsa.es Bistable reversible solenoid ERDI15 TYPE Revision: 1/2010 Plunger stroke direction ASSEMBLY: the screw does not have to exceed the wall of the magnetic circuit *Obligatory earthing if the metallic parts are accessible. Voltage 6V - (Coil in parallel) Voltage 12V - (Coil in serie) This solenoid has two resting positions, the stroke movement "s" from a position to the other one is made by a polarized electric signal, the plunger is retained in each end of stroke position using permanent magnets. Connection scheme: Magnet coil A Magnet coil B Red cable - A White cable - B White cable - A Red cable - B B A B A Towards A Towards B - - + + Towards A Towards B - - + + Red A White B Red B White A Red A Red B White A y B White