• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

CU20CPB - 1 Pages

  1. P. 1

Catalogue excerpts

Revisiones Fecha Solenoid shown in extended position: 4 holes M2,5x5 useful depth Supply mode: -Red cable to +VDC ; Black cable to -VDC the plunger will go to 1) position -Black cable to +VDC Red cable to -VDC the plunger will go to 2) position 2) Position Hold by spring (0.25N) 1) Position Hold by magnets (15N) Technical data: Rev Descripción - Protection rate: IP40 - Insulation class: Y 90ªC - Standard voltage: VDC (3V; 3.6V; 5V; 6V; 9V; 12V; 24V; 48V) - Absorved power at 20ºC: 12 W (ED25%) - Stroke: 7.5±0,3mm - Plunger weight (g): 19 - Total weight (g): 90 - Minimum supply pulse time: 20ms - Maximum radial stress (N): 2000N (Assembly A) - Maximum radial stress (N): 750N (Assembly B) Asembly A) way: Asembly B) way: 2 supply leads 1x0,25mm² Color: 1 Red / 1 Black Length: L=1500mm 2 holes M2,5 x4 useful depth Remark: The calculation of the effective force from position 2) to position 1) will be, the value of "100%Un" curve or the "80%Un" curve minus the value of the "Internal spring" force for each stroke position. The effective force from position 1) to position 2) will be the value of "internal spring" curve Drawn O.Otiñano Erk. 16/10/2013 NAFSA S.L. Checked A.Zuberogoitia 16/10/2013 Títtle Approved Coating Unless otherwise indications Drawing dimmensions on milimeters, angles in A4 degrees, tolerances ±0,1 y ±10´ Material: Beveled edge 0,3x45º Rugosity: Ra1,6 Scale: 1:1 Weight 0.090 Kg Sheet 1 of 1 Linear bistable solenoid bolt CU20-CPB --V

 Open the catalogue to page 1

All NAFSA catalogues and technical brochures

  1. CU20CP25-E

    1 Pages

    En
  2. CU20CP100-E

    1 Pages

    En
  3. CU20CP25-2L

    1 Pages

    En
  4. CU20CP100-2L

    1 Pages

    En
  5. CP38

    1 Pages

    En
  6. C30-M5-NC2

    1 Pages

    En
  7. ERM300-35

    1 Pages

    En
  8. VM135E

    1 Pages

    En
  9. ERMI550-40-60.

    1 Pages

    En
  10. ERMI180-40-60

    1 Pages

    En