Adjusting nuts - 18 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

ՊDED Llnp.ir and Motion Solutions Adjusting locking/unlocking nuts and rings LR, LRE, LF, LFE, LRP, LX GS 408

 Open the catalogue to page 1

Adjusting locking/ unlocking nuts and rings LR, LRE, LF, LFE, LRP, LX

 Open the catalogue to page 2

Adjusting locking/ unlocking nuts and rings LR, LRE, LF, LFE, LRP, LX - Frequent clockwise and counterclockwise reversing rotation systems - Reduction of inertias through the use of selected materials (Titanium alloys and Aluminium alloys). Spring nuts and rings Latest range of spring nuts and rings comprises 6 different models of adjusting locking/unlocking devices featuring the same securing technique through a threaded locking spring. Clamping system - The threaded bore of the nuts and outside threading of the rings is partially wired EDM to form a clamping spring. When tightening the Hc grub...

 Open the catalogue to page 3

Mounting the nuts and rings - The mounting occurs by driving the spring nuts and rings clockwise with standard spanner wrench (Din 1810) adapting onto the peripheral notches (b x h) of the nuts. - The mounting can also easily be achieved thanks to the pin-key holes on the front-side of the nuts with the adequate key. - Once in the correct position on the shaft/sprindle the blocking can be simply secured by turning the Hc grub screws located either on the outside diameter or on the front side of the nuts. - For nuts showing two locking springs or additional clamping screws (LRE - LFE - LRP) it...

 Open the catalogue to page 4

LR NUT 1 Clamping spring Radial locking Specifications - Material: High elastic limit steel - Peripheral notches: 4 at 90° - To ensure squareness and minimum run-out of the nuts and rings, all threading and contact face machining operations are performed in one setting. - Grub screw: Hc type with dog-point tip 14.9 - Standard manufacturing: - 4H class precison threading - right-hand thread - Fine-ground contact face - Marquing on the opposite side - Black oxide Options - Other versions are also available upon request: - Fine-ground threads - Left-hand thread - 2 twinned screws for increased locking...

 Open the catalogue to page 5

LRE NUT 2 Symmetrical clamping springs Balanced radial locking Specifications - Material: High elastic limit steel - Peripheral notches: 4 at 90° - To ensure squareness and minimum run-out of the nuts and rings, all threading and contact face machining operations are performed in one setting. - Screw: Hc type with dog-point tip 14.9 - Standard manufacturing: - 4H class precision threading - right-hand thread - Fine-ground contact face - Marquing on the opposite side - Black oxide Options - Other versions are also available upon request: - fine-ground threads - Left-hand thread - 2 twinned screws...

 Open the catalogue to page 7

LF NUT 1 Clamping spring front locking Specifications - Material: High elastic limit steel - Peripheral notches: 4 at 90° - To ensure squareness and minimum run-out of the nuts and rings, all threading and contact face machining operations are performed in one setting. - Screw: Hc type set-screw with cone tip 14.9 - Standard manufacturing: - 4H class precision threading - right-hand thread - Fine-ground contact face - Marquing on the opposite side - Black oxide Options - Other versions are also available upon request: - fine-ground threads - Left-hand thread - Other sizes - Other materials Characteristics...

 Open the catalogue to page 9

LFE NUT 2 Symetrical clamping springs balanced front locking Specifications - Material: High elastic limit steel - Peripheral notches: 4 at 90° - To ensure squareness and minimum run-out of the nuts and rings, all threading and contact face machining operations are performed in one setting. - Screw: Hc type with dog-point tip 14.9 - Standard manufacturing: - 4H class precision threading - right-hand thread - Fine-ground contact face - Marquing on the opposite side - Black oxide Options - Other versions are also available upon request: - fine-ground threads - Left-hand thread - Other sizes - Other...

 Open the catalogue to page 11

LRP NUT 2 Symetrical clamping springs radial locking heavy duty series Specifications - Material: High elastic limit steel - Peripheral notches: 4 at 90° - To ensure squareness and minimum run-out of the nuts and rings, all threading and contact face machining operations are performed in one setting. - Screw: Hc type with dog-point tip 14.9 - Standard manufacturing: - 4H class precision threading - right-hand thread - Fine-ground contact face - Marquing on the opposite side - Black oxide Options - Other versions are also available upon request: - Fine-ground threads - Left-hand thread - Other...

 Open the catalogue to page 13

LX RING 1 Clamping spring External front locking Specifications - Material: High elastic limit steel - Peripheral notches: 4 at 90° - To ensure squareness and minimum run-out of the nuts and rings, all threading and contact face machining operations are performed in one setting. - Screw: Hc type set-screw with cone tip 14.9 - Standard manufacturing: - 4g class precision threading - Fine ground threads - right-hand thread - Fine-ground contact face - Marquing on the opposite side - Black oxide Options - Other versions are also available upon request: - Left-hand thread - Additional clamping springs...

 Open the catalogue to page 15

© 2009 NADELLA Printed in Italy NADELLA keeps the right of all modification, even wothout notice if considered necessary to improve its products. Reproduction, even partial, are strictly forbidden Linear and Motion Solutions if not previously authorised. Nadella Milano Via Melette, 16 Tel. +39 02.27.093.297 20128 Milano Fax +39 02.25.51.768 http: www.nadella.eu e-mail: customer.service@nadella.it Nadella GmbH Nufringen Rudolf-Diesel-Straße 28 Tel. +49 07032 95 40-0 71154 Nufringen Fax +49 07032 95 40-25 http://www.nadella.eu e-mail: info@nadella.de AUSTRIA TAT Technom Antriebstechnik GmbH Haidbachstraße...

 Open the catalogue to page 18

All Nadella catalogues and technical brochures

  1. Linear modules

    83 Pages

    En
  2. LET'S MOVE.

    6 Pages

    En
  3. AXC 60

    2 Pages

    En
  4. Flyer

    2 Pages

    En
  5. Let'sMove

    6 Pages

    En
  6. Cam followers

    22 Pages

    En
  7. Needle Bearings

    230 Pages

    En
  8. Company Brochure

    12 Pages

    En
  9. Telescopic-Line

    77 Pages

    En
  10. Linear Module AXN

    33 Pages

    En