video corpo

Laboratory - 64 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

Catalogue excerpts

Made in Germany Nabertherm, and our staff of more than 300 employees worldwide, have developed and produced furnaces and ovens for laboratory and industrial applications for more than 50 years. 150,000 satisfi ed customers in 100 countries document our success. Subsidiaries and partners, established for years, in all the signifi cant countries of the world guarantee one-on-one customer service and advice on site. Complete fabrication of our furnaces takes place exclusively at our German head offi ce. Nabertherm will continue to rely on its German production facility in the future. Benchmarks in...

 Open the catalogue to page 2

L 9/11L 5/12 Our L 3/11 - LT 40/12 series is the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The furnaces come equipped with either a folding door or lift door at no extra charge. Tmax 1100 C or 1200 аC Ceramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replace Highly durable cured vacuum fi bre module lining Casing made of sheets of textured stainless steel (non-rusting design) Double-walled casing for low external temperatures...

 Open the catalogue to page 4

Air preheating Air inlet Fibre muffl e Heating plate Exhaust Air intake and exhaust fl ow principle LV 3/11 >

 Open the catalogue to page 8

Vent for connection to anexhaust pipe.Part number: 631000140 Vent with fan , to remove exhaust gas from the furnace better. The P 320 controller can be used to control the vent automatically.Part number: 631000141 Catalytic converter with fan for removal of organic components from the exhaust air. Organic components are catalytically oxidized at about 600 C, broken into carbon dioxide and water vapour. Irritating odors are thus largely eliminated. The P 320 controller can be used to switch the catalytic converter automatically.Part number: 631000166 Select between different base plates and collecting...

 Open the catalogue to page 13

Our wide selection of annealing and hardening furnaces can be extended with a variety of hardening accessories to suit your application. The accessories shown below represent only a small fraction of the products available. For further details, please see our separate catalogues for heat-treatment furnaces and hardening accessories. Hardening and Annealing Boxes Hardening and annealing boxes with or without protective gas connectors, up to 1100 C, also in a tailor-made variant for cold evacuation, for instance for the annealing of small parts and bulk goods Annealing tray with Holder Annealing...

 Open the catalogue to page 15

RS ../13 hinged tubed furnace with special tube of quartz glass and fl anges for protective gas operation Quartz glass and fl anges for protective gas operation as optional equipment > Various working tubes as optional equipmentBurst protectior for heating elements and/or as support surface for the load Switching and control unit separate from furnace mounted on an optional trolley 17 >

 Open the catalogue to page 17

RHTH horizontal tube furnace 70/300/16 with vacuum fl anges as optional equipment Over-temperature limit controller Gas panel The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fi bre plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under a protective gas atmosphere, vacuum, or even with fl ammable gasses. Tmax 1600 C, 1700 аC, or 1800 C MoSi > 2 heating...

 Open the catalogue to page 18

-5 mbar (see pages 20 and following) Choice of various working tubes RHTV 100-250/17 vertical tube furnace with stand as optional equipment ModelTmaxOuter dimensions in mm Tube Heated Length constantPowerSupplyWeightHorizontal designذCWDHinterior/mmlength mmtemperature +/- 5 CkWvoltage*in kgRHTH 40/100/..42039051040100302.2single-phase45RHTH 40/250/..42054051040250803.63-phase > 1 60RHTH 40/500/..420790510405001708.03-phase > 1 90RHTH 70/150/..160052045062070150504.53-phase > 1 65RHTH 70/300/..or520590620703001006.43-phase > 1 90RHTH 70/600/..1700520890620706002008.03-phase > 1 120RHTH 100/150/..or520450620100150504.83-phase...

 Open the catalogue to page 19

When equipped with various equipment packages, the tube furnace series RS, RHTH, and RHTV can be adapted for operation with nonfl ammable or fl ammable gasses or for vacuum operation. The different equipment packages can be delivered together with the furnace, or later as needed. > for simple protective gas applications This package represents a basic version suffi cient for many applications, for operation with nonfl ammable protective gasses. The standard working tube made of ceramic C 530 delivered with the furnace can still be used. Tube of ceramic C 530 can be used 2 plugs of ceramic fi bre...

 Open the catalogue to page 20

for gas-tight operation with hydrogen, introduced above 800 C Adding gas supply system 3 to the tube furnace allows operation under a hydrogen atmosphere. The built-in safety system allows the introduction of hydrogen into the working tube, when heated to at least 800 аC. The furnace and control system are designed to provide the highest possible degree of safety for the furnace, operator, and surroundings. Longer, gas-tight working tube of ceramic C 630 for furnaces to 1300 C, or of C 799 for temperatures above 1300 аC 2 vacuum-tight, water-cooled stainless steel fl anges with fi ttings on the...

 Open the catalogue to page 21

Besides our extensive selection of standard tube furnaces, we can also provide you with a tube furnace custom-designed for your application. Some examples of tube furnace systems we have supplied to other customers are listed below. From modifi ed standard furnaces to fully-customized tube furnace systems we will fi nd a solution for your needs! RS 100/1500/13S tube furnace for integration in the customer's production plant Operates horizontally, vertically, or at a defi ned angle Tmax 1300 ְC Heated length: 1500 mm Tube interior diameter: 100 mm 3-zoned control system for optimization of temperature...

 Open the catalogue to page 25

All Nabertherm catalogues and technical brochures

  1. Foundry

    64 Pages

    En
  2. Advanced Materials

    72 Pages

    En
  3. Arts & Crafts

    28 Pages

    En
  4. Glass

    44 Pages

    En

Archived catalogues