catalogue search
P. 01
P. 02
P. 03
P. 04
|
|
|
|
You may also be interested in
Capacitive level sensor, Calibrator, Humidity sensor, Converter, Flow-meter
Text version of the page
Type Putting into work
A base is welded onto the pipe. A 18 mm hole is drilled, the sensor is inserted flush with the inner diameter of the pipe. For commissioning and calibration a notebook with our MF- SMART software is needed. Calibration can be p erformed with either one or multiple referenceflow amounts. The measurement value is output either analog or as digital signal. A serial COM interface is available at the front of the transmitter to connect a notebook computer and a RS485 interface for connection to a PLC system. . Sensor Communication unit
(Optional) Transmitter
D-21220 Seevetal-Ramelsloh Mütec Instruments GmbH Tel.:+49 (0) 4185-80 83-0 Mail: muetec@muetec.de Bei den Kämpen 26 Fax:+49 (0) 4185-80 83-80 Web: www.muetec.de
A base is welded onto the pipe. A 18 mm hole is drilled, the sensor is inserted flush with the inner diameter of the pipe. For commissioning and calibration a notebook with our MF- SMART software is needed. Calibration can be p erformed with either one or multiple referenceflow amounts. The measurement value is output either analog or as digital signal. A serial COM interface is available at the front of the transmitter to connect a notebook computer and a RS485 interface for connection to a PLC system. . Sensor Communication unit
(Optional) Transmitter
D-21220 Seevetal-Ramelsloh Mütec Instruments GmbH Tel.:+49 (0) 4185-80 83-0 Mail: muetec@muetec.de Bei den Kämpen 26 Fax:+49 (0) 4185-80 83-80 Web: www.muetec.de