You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | |
| | | |
| | | SPECIFICATIONS | | |
| | | | | | | | | | MAKE | Mustana | | | | MODEL | 519 | | | | CAPACITIES Lift Capacity (ka) | 5,500 lbs. (2495) | | | | Max. Lift Height (m) | 19'1" (5.8) | | | | Capacity at Max. Lift Heiaht (ka) | 3,000 lbs. (1360) | | | | Max. Forward Reach (m) | 11' (3.35) | | | | Capacity at Max. Reach (ka) | 1,850 lbs. (839) | | | | Max. Reach below Grade (mm) | 0" (0) | | | | ENGINE Type | Deutz - 4-cvl. Diesel | | | | Power (kW) | 64 hp (48) | | | | Aspiration | Turbocharaed | | | | Model | TD2009 L04 | | | | Rated Speed | 2600 rpm | | | | COMPONENTS Transmission | Rexroth 2-Speed Hydrostatic | | | | Max. Travel Speed (km/h) | 15 mph (24) | | | | Steerina | 4-wheel 2-wheel Crab | | | | Service Brakes | Internal Wet Disc 2-wheel Hydraulic | | | | Parkina Brake | SAHR (Sprina-Applied, Hvdraulic-Release) | | | | Axle Manufacturer | Dana | | | | HYDRAULIC SYSTEM Pump Type | Gear | | | | Flow Capacity (L/min) | 22 apm (83) | | | | System Pressure (bar) | 3,350 psi (231) | | | | Hydraulic Reservoir Capacity (L) | 18 aal. (68) | | | | GENERAL SPECIFICATIONS Approximate Weiaht (ka) | 10,000 lbs. (4536) | | | | Lenath - Less Forks (m) | 12'4" (3.76) | | | | Width (m) | 5'11" (1.80) | | | | Ground Clearance (mm) | 14" (356) | | | | Wheelbase (m) | 7'6" (2.29) | | | | Turnina Radius (m) | 11' (3.35) | | | | Overall Heiaht (m) | 6'4" (1.93) | | | | Fuel Tank Capacity (L) | 17 aal. (64) | | | | | | | | | |
| | | |
| | | ATTACHMENT OPTIONS: Bucket & Truss Boom | | |
| | | |
| | | TIRE OPTIONS: 12.00 x 16.5 Bias/10 PR 12.00 x 16.5 Bias/10 PR - Foam-Filled | | |
| | | |
| | | CONTA CT YOUR MUSTANG DEALER TODAY! | | |
| | | |
| | | musTAnG 1880 Austin Road Owatonna, MN 55060 507-451-7112 Fax: 507-451-8209 www.mustangmfg.com © 2008 Mustang Manufacturing Company, Inc. Printed in the U.S.A. rev. 1/2008 | | |
| | | SAFETY IS NO ACCIDENT. Mustang Manufacturing Company reminds users to read and understand the operator's manual before operating any piece of equipment. Additionally, make sure all safety devices and shields are in place and functioning properly. US OSHA regulations require that all forklift operators be trained on the equipment and have proven their competence to a qualified trainer. Mustang Manufacturing Company reserves the right to add improvements or make changes in specifications at any time without notice or obligation. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | |