Stainless Steel
20Pages

Style FZ Stainless Steel Pressure filter Te c h n i c a l d a t a Style In-Line filter: • FZH 010-011 • FZP 039 • FZH 039 • FZP 136 • FZX 011 Element description Max. working pressure: 700 bar Max. working pressure: 420 bar Max. working pressure: 700 bar Max. working pressure: 420 bar Max. working pressure: 1000 bar Manifold mounting: • FZB 039 Max. working pressure: 320 bar • FZM 039 Max. working pressure: 320 bar A - Microfibre Characteristics of filter elements with absolute filtration, A series For microfibre filter elements, filtration degree is defined by the test bench MULTIPASS ISO 16889. Duplex pressure filter: • FZD 010 Max. working pressure: 350 bar • FZD 021 Max. working pressure: 350 bar • FZD 051 Max. working pressure: 350 bar Filter housing (Materials) • Head: AISI 316L • Housing: AISI 316L • Bypass valve: AISI 316L Multipass test in compliance ISO 16889 Contaminant ISO MTD Bypass valve • Opening pressure 6 bar ±10% Temperature • From -50°C to +120°C Seals • Standard NBR • Optional FPM • Optional MFQ Filter element series A (-25°C to +110°C) series V (-20°C to +120°C) series F (-50°C to +120°C) • Microfibre filter elements • Microfibre filter elements • Stainless Steel Microfibre filter elements • Fluid flow through the filter element from OUT to IN. STAINLESS STEEL PRESSURE FILTER Element series “N - R”: • End cap: Nylon • Core tube: Tinned Steel • External/Internal support: Wire mesh Epox painted • Media/Support/Pre-filter: Microfibre/Syntetic Element series “H - S”: • End cap: Tinned Steel • Core tube: Tinned Steel • External support: Wire mesh Epox painted • Internal support: Wire mesh Stainless Steel • Media/Support/Pre-filter: Microfibre/Syntetic Reference standards All filter elements comply with the following ISO standards. STAINLESS STEEL PRESSURE FILTERS ARE PROVIDED FOR VERTICAL MOUNTING - Collapse and burst resistance. - Bubble point test resistance. - Compatibility with fluids. - Resistance to axial deformation. 23181 - Fatigue test with flow. Element series “U”: • End cap: Stainless Steel • Core tube: Stainless Steel • External support: Stainless Steel • Internal support: Stainless Steel • Media/Support/Pre-filter: Microfi

Hydraulic symbols Filter B series Compatibility (to ISO 2943) • Housings compatible with: Mineral oils, synthetic fluids aqueous emulsions, water and glycol. STAINLESS STEEL PRESSURE FILTER • The filter elements are compatible with: Mineral oils, synthetic fluids. Aqueous emulsions, water and glycol. • NBR seals series A, compatible with: Mineral oils, synthetic fluids, aqueous emulsions and water and glycol. • FPM seals series V, compatible with: Mineral oils, synthetic fluids aqueous emulsions, water and glycol. • MFQ seals series F, compatible with: Mineral oils, synthetic fluids aqueous...

Filter sizing Multiplication factor “Y” for definition of the pressure drop of filter elements. Reference viscosity 30 mm2/s Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0,86 kg/dm3 to ISO 3968. Filter Element Δp varies proportionally with density. Filter Element Flow rate l/min Sizing data for single cartridge, head at top Δp Tot. Δpc Filter housing Δpe Filter element Y Multiplication factor Q l/min = flow rate V1 = reference viscosity 30 mm2/s (cSt) V2 = operating viscosity in mm2/s (cSt) Δp Tot. = Δpc + Δpe Δpe = Y : 1000 x Q x (V2/V1)...

Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0,86 kg/dm3 to ISO 3968. Δp varies proportionally with density. Flow rate l/min Flow rate l/min Flow rate l/min Flow rate l/min Flow rate l/min Flow rate l/min Flow rate l/min Flow rate l/min 301 STAINLESS STEEL PRESSURE FILTER

In-Line Stainless Steel Pressure Filter Recommended maximum flow rate - Pressure drop of filter assembly equal to Δp 1,5 bar. - Pressure drop of FZX 011 filter assembly equal to Δp 5 bar. - Oil kinematic viscosity 30 mm2/s (cSt). - Density 0,86 kg/dm3. Serie N - Flow rate l/min Serie H - Flow rate l/min Serie N - Flow rate l/min Serie H/U - Flow rate l/min Filtration Length Serie N - Flow rate l/min Serie H/U - Flow rate l/min Serie N - Flow rate l/min Serie H/U - Flow rate l/min STAINLESS STEEL PRESSURE FILTER Serie H/U - Flow rate l/min

Length Filter STAINLESS STEEL PRESSURE FILTER Indicator port X2 Plug - A/F 30 Optional Indicator port X2 Plug - A/F 30 Optional Thread connections Type

Indicator port X2 Plug - A/F 30 Optional Indicator port X2 Plug - A/F 30 Optional STAINLESS STEEL PRESSURE FILTER Thread connections Thread connections Length Filter

Indicator port X2 Plug - A/F 30 Indicator port X2 Plug - A/F 30 Optional STAINLESS STEEL PRESSURE FILTER Thread connections Length Filter

STAINLESS STEEL PRESSURE FILTER FZX 011 - Thread connections Type Size - 700 bar

Filter assembly Filter element Filter element High pressure filter AISI 316 In-Line port High pressure filter AISI 316 With 90° out port Without indicator port With indicator port 7 - Filter element 2 - Filter length A03 Without bypass With bypass Absolute filtration Inorganic Microfibre ßx (c) 8 - Max filter element differential pressure Without bypass + with reverse flow With bypass + with reverse flow Δp 210 bar (Stainless Steel filter element) MP Filtri standard Customer request 5 - Connections Indicator plug: Stainless Steel plug X2 has to be ordered separately. For Clogging Indicator:...

Filter assembly Filter element Filter element With double indicator port (plug not supplied - only for FZP/FZH 039) Without indicator port With indicator port Without bypass With bypass (opening pressure: 6 bar) With reverse flow + without bypass Absolute filtration Inorganic Microfibre ßx (c) 8 - Max filter element differential pressure N With reverse flow + bypass Δp 210 bar (Stainless Steel filter element) (opening pressure: 6 bar - only for FZP/FZH 039) Without bypass + check valve With bypass + check valve (opening pressure: 6 bar - only for FZP/FZH 039) MP Filtri standard On request...