Catalogs >
MP Filtri >
LMP 211 - 210 / LDP DIN 24550

LMP 211 - 210 / LDP DIN 24550
6Pages

Catalog excerpts

LMP 210 - 211 LDP Maximum pressure 60 bar Flow rates to 330 l/min Te c h n i c a l d a t a Filter housing (Materials) • Head: Aluminium • Bowl: Cataphoresis Painted Steel • Bypass valve: AISI 304 - Nylon Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0,86 kg/dm3 to ISO 3968. Pressure • Working pressure: 60 bar (6 MPa) • Test pressure: 90 bar (9 MPa) • Burst pressure: 210 bar (21 MPa) • Pulse pressure fatigue test: 1.000.000 cycles with pressure from 0 to 60 bar (6 MPa) Δp varies proportionally with density. • From -25°C to +110°C Bypass valve • Opening pressure 3,5 bar ±10% • Other opening pressures on request. LMP 211/LDP - Δp Housing series A series V LMP 210/211 - LDP FILTERS ARE PROVIDED FOR VERTICAL MOUNTING Weights (kg) Length • LMP210-211 • LDP016 • LDP025 • LDP040 Flow rate l/min • Microfibre filter elements series N: 20 bar • Fluid flow through the filter element from OUT to IN. Flow rate l/min Volumes (dm3) Valves Bypass valve pressure drop Connections • LMP 210/211 - LDP: Inlet/Outlet In-Line IN-LINE FILTER

Open the catalog to page 1

Recommended maximum flow rate - Pressure drop of filter assembly equal to Δp 0,6 bar. - Oil kinematic viscosity 30 mm2/s (cSt). - Density 0,86 kg/dm3. - Connections of filter under test G 1 1/2” SAE 3000 PSI/M. Flow rate l/min IN-LINE FILTER

Open the catalog to page 2

Flanged connections A/F 30 120 * Indicator port T2 Plug - A/F 30 Standard * Indicator port T2 Plug - A/F 30 Standard Length Filter Length Filter Length Filter IN-LINE FILTER LMP 211 - LDP Thread connections Type LMP 210 Flange connections Type

Open the catalog to page 3

FILTER Series LMP 210/211 - LDP See order table Filter assembly Filter element O-Ring filter element O-Ring housing Indicator connection plug IN-LINE FILTER Item Description

Open the catalog to page 4

Filter assembly Filter element 6 - Indicator port (only for LMP 211) Filter element With plugged indicator port Wire mesh 25 μm Wire mesh 60 μm Resin - Impregnated paper Resin - Impregnated paper Absolute filtration Inorganic Microfibre Without bypass With bypass FPM NBR (compatible with fluid HFA, HFB, HFC) Nominal Filtration Nominal Filtration 8 - Max filter element differential pressure N IN-LINE FILTER MP Filtri standard Customer request For Clogging Indicator: See page 318 MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter...

Open the catalog to page 5

Filter assembly Filter element Filter element Filter element in according to: DIN 24550 - T3 DN250 Filter element in according to: DIN 24550 - T3 DN400 With plugged indicator port Filter element in according to: DIN 24550 - T3 DN160 6 - Filter element Inorganic microfibre 3 μm Inorganic microfibre 16 μm Inorganic microfibre 25 μm Without bypass With bypass Wire mesh 25 μm Wire mesh 60 μm Resin - Impregnated paper Resin - Impregnated paper Absolute filtration Inorganic Microfibre NBR (compatible with fluid HFA, HFB, HFC) Nominal Filtration Nominal Filtration 7 - Max filter element...

Open the catalog to page 6