LMD 400 - 401 - 431 DUPLEX
8Pages

{{requestButtons}}

Catalog excerpts

LMD 400 - 401 - 431 DUPLEX - 1

LMD 400 - 401 - 431 Maximum pressure 16 bar Flow rates to 590 l/min Te c h n i c a l d a t a Filter housing (Materials) • Head: Anodized Aluminium • Housing: Anodized Aluminium • Manifolds: Steel - Painted black • Bypass valve: Steel • 3-way ball valve: Steel housings - Stainless Steel ball • Valve: Phosphated Steel - Stainless Steel Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0,86 kg/dm3 to ISO 3968. Δp varies proportionally with density. Pressure • Working pressure: 16 bar (1,6 MPa) • Test pressure: 25 bar (2,5 MPa) • From -25°C to +110°C Bypass valve • Opening pressure 3,5 bar ±10% • Other opening pressures on request. Δp Elements type • Microfibre filter elements series N-W: 20 bar • Fluid flow through the filter element from OUT to IN. Flow rate l/min series V LMD 400-401-431 FILTERS ARE PROVIDED FOR VERTICAL MOUNTING Weights (kg) Length • LMD400-401 • LMD431 Bypass valve pressure drop 4 60 - Connections • LMD 400-401: In-line Inlet/Outlet • LMD 401: Same side • LMD 400-401-431: In-Line Flow rate l/min IN-LINE FILTER Recommended maximum flow rate - Pressure drop of filter assembly equal to Δp 0,6 bar. - Oil kinematic viscosity 30 mm2/s (cSt). - Density 0,86 kg/dm3.

Open the catalog to page 1
LMD 400 - 401 - 431 DUPLEX - 2

Filter fixing holes LMD 400 Flange connections Length Filter 2 1/2” SAE 3000 psi/M 2 1/2” SAE 3000 psi/UNC = F1 In-line connection (only for LMD 401 - 431) = F2 In-line connection (only for LMD 401 - 431) Breather plug G 3/8” - A/F 8 Indicator port Plug T2 - A/F 30 Bypass valve A/F 14 Oil drain plug G 3/8” - A/F 8

Open the catalog to page 2
LMD 400 - 401 - 431 DUPLEX - 3

Filter fixing holes LMD 400 IN-LINE FILTER Flange connections 2 1/2” SAE 3000 psi/M 2 1/2” SAE 3000 psi/UNC = F1 In-line connection (only for LMD 401 - 431) = F2 In-line connection (only for LMD 401 - 431) Breather plug G 3/8” - A/F 8 Indicator port Plug T2 - A/F 30 Bypass valve A/F 14 Oil drain plug G

Open the catalog to page 3
LMD 400 - 401 - 431 DUPLEX - 4

Filter fixing holes LMD 431 Option P02 “Internal tube for reduced flow rate” is recommended for flow rate values below 150 I/min. The use of option P02 makes it easier to fill the housing with the operating fluid. P02 “Internal tube for reduced flow rates” IN-LINE FILTER Flange connections Length Filter 2 1/2” SAE 3000 psi/M 2 1/2” SAE 3000 psi/UNC = F1 In-line connection (only for LMD 401 - 431) = F2 In-line connection (only for LMD 401 - 431) Breather plug G 3/8” - A/F 8 Indicator port Plug T2 - A/F 30 Oil drain plug G 3/8

Open the catalog to page 4
LMD 400 - 401 - 431 DUPLEX - 5

Breather plug G 3/8” - A/F 8 Indicator port Plug T2 - A/F 30 Compensation valve Oil drain plug G 3/8” - A/F 8 LMD 400 - 401 - 431 Fit one differential indicator for individual filter assembly. IN-LINE FILTER

Open the catalog to page 5
LMD 400 - 401 - 431 DUPLEX - 6

Filter assembly One-way valve Flat seal IN-OUT O-Ring Hexagon socket screws Spring washers Exagon bolt screws Spring washers Kit ball valve with hose fitting IN-LINE FILTER

Open the catalog to page 6
LMD 400 - 401 - 431 DUPLEX - 7

IN-LINE FILTER The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. Copyright. All rights reserved.

Open the catalog to page 7
LMD 400 - 401 - 431 DUPLEX - 8

Filter assembly Filter element 6 - Filter element Filter element Wire mesh 25 μm Wire mesh 60 μm Resin - Impregnated paper Resin - Impregnated paper Absolute filtration Inorganic Microfibre ßx (c) Nominal Filtration Nominal Filtration 7 - Max filter element differential pressure Without bypass With bypass FPM (Compatible with fluid HFA, HFB, HFC) Maintenance from base of housing With internal tube reduced flow rate Customer request 2 1/2” SAE 3000 psi/M 2 1/2” SAE 3000 psi/UNC = F1 In-line connection (only for LMD 401 - 431) = F2 In-line connection (only for LMD 401 - 431) Customer request...

Open the catalog to page 8

All MP Filtri catalogs and technical brochures

  1. LMS/LDS Series

    17 Pages

  2. LMC/LDC Series

    17 Pages

  3. LMG Series

    21 Pages

  4. ACCESSORIES

    28 Pages

  5. BELL HOUSING

    72 Pages

  6. COUPLINGS

    46 Pages

  7. Return Filters

    230 Pages

  8. FHD - DUPLEX

    17 Pages

  9. FHB - MANIFOLD

    16 Pages

  10. FHM - MANIFOLD

    21 Pages

  11. FHP

    19 Pages

  12. FMP

    14 Pages

  13. Spin-On Filter

    78 Pages

  14. LMP 124

    6 Pages

  15. MRSX

    12 Pages

  16. MSH

    4 Pages

  17. MPS

    8 Pages

  18. FMP 039

    4 Pages

  19. FRI

    10 Pages

  20. MPI

    8 Pages

  21. MPH

    18 Pages

  22. MPT

    15 Pages

  23. MST

    4 Pages

  24. STR

    4 Pages

  25. RF2

    4 Pages

  26. MPF

    20 Pages

  27. LMP 400 - 430

    10 Pages

  28. LMP 210

    5 Pages

  29. FAS

    4 Pages

  30. SF2 500

    12 Pages

  31. SF2 250

    8 Pages

  32. SA - SAP

    10 Pages

  33. STR

    4 Pages

  34. In-line filters

    108 Pages

  35. Accessories

    68 Pages

  36. Catalogue

    19 Pages