Text version of the page

8 | 9

5.2. View of TIC3-400 (Controller for 4kW motor rating)

figure 8

Universal Controller - 59219 6. Control Panel

IndicatorMeaningExplanation FREF

Nominal Frequency LEDLED on: Indicates the nominal frequency can be changed or monitored.

FOUT

Output Frequency LEDLED on: Indicates the output frequency of the inverter can be monitored.

IOUT

Output Current LEDLED on: Indicates the output current of the inverter can be monitored.

MNTR

Multifunction LEDLED on: Indicates that the values in U01 to U10 are being monitored.

F/R

Direction LED LED on: Indicates that when the frequency inverter is on, the direction of rotation can be controlled via the RUN key (not relevant to rotary index table controller).

LO/RE

Local/Remote LEDLED on: Indicates that the frequency inverter can be controlled either from the digital control panel or via remote commands (not relevant to TIC).

PRGM

Parameter Setup LEDLED on: Indicates that parameters n001 to n179 can be changed or monitored. Operating Mode KeyRotate through the selection/monitoring LEDs described above. Enter KeyAccept the changes made to the parameter number and parameter value. Up KeyIncrement the multifunction monitoring number, parameter number or parameter value. Down KeyDecrement the multifunction monitoring number, parameter number or parameter value. RUN STOPRESET

, These two keys and the potentiometer have no function for rotary index table controller.