Metal separator Metro SF 50 / 70 / 100 / 150 - 4 Pages

Add to MyDirectIndustry favorites
Metal separator Metro SF 50 / 70 / 100 / 150

Catalog excerpts

Technical data sheet Metro sF-50-i50-i-TB-EN-vi.0.docx Metal separator Metro SF 50 / 70 / 100 / 150 motan ■ Dimensions Metro SF 50 / 70 1 Control unit MS+ Control 2 Compressed-air connection 3    Separation unit 4    Inlet flange plate 5 Material outlet (Jacob pipe system) 6 Reject outlet (Jacob pipe system) All dimensions in mm 11 The stated detection sensitivity (ferrous ball 0 in mm) applies for nonconductive products at the standard operation frequency and refers to the centre of the detection aperture (most disadvantageous position). Products that show intrinsic conductivity due to moisture content, electrolytes or other conductive contents may reduce the sensitivity as well as variations of product temperature, environmental effects (mechanical shocks and vibrations, electromagnetic pollution) or the set product angle. The detectable size of metal particles depends on their nature, shape and position while passing the metal detector. 2) The stated throughput rate is based on well pourable granules. The shape of the particles and thus the flow characteristic of the bulk material determine the throughput rate which can vary. Upstream installed magnet separators may also reduce the throughput rate due to reduction of the cross section.    All dimensions in mm Subject to change without notice ! Motan GmbH • Max-Eyth-Weg 42 • D-88316 Isny - Germany Tel. +49(0)7562/76-0 • Fax: +49(0)7562/76-111 • e-mail: motan.ger@motan.de • Internet: www.motan.com

 Open the catalog to page 1

Technical data sheet Metro sF-50-i50-i-TB-EN-vi.0.docx Metal separator Metro SF 50 / 70 / 100 / 150 ■ Dimensions Metro SF 100 (Option Colortronic) 1 Control unit MS+ Control 2 Compressed-air connection 3    Separation unit 4    Inlet flange plate 5 Material outlet (Jacob pipe system) 6 Reject outlet (Jacob pipe system) All dimensions in mm 11 The stated detection sensitivity (ferrous ball 0 in mm) applies for nonconductive products at the standard operation frequency and refers to the centre of the detection aperture (most disadvantageous position). Products that show intrinsic conductivity...

 Open the catalog to page 2

Technical data sheet Metro sF-50-i50-i-TB-EN-vi.0.docx Metal separator Metro SF 50 / 70 / 100 / 150 motan ■ Dimensions Metro SF 150 (option Colortronic) 1 Control unit MS+ Control 2 Compressed-air connection 3    Separation unit 4    Inlet flange plate 5 Material outlet (Jacob pipe system) 6 Reject outlet (Jacob pipe system) All dimensions in mm 11 The stated detection sensitivity (ferrous ball 0 in mm) applies for nonconductive products at the standard operation frequency and refers to the centre of the detection aperture (most disadvantageous position). Products that show intrinsic...

 Open the catalog to page 3

Technical data sheet Metro sF-50-i50-i-TB-EN-vi.0.docx Metal separator Metro SF 50 / 70 / 100 / 150 motan ■ Conditions of use Use: Bulk material classification: • Grain shape: • Max. grain size: • Pourability: • Attributes: • Material flow: • Bulk material temperature: • Ambient conditions: • Storage and shipping conditions: For inspecting free falling bulk materials in the plastics industry and similar applications in other industries as well as applications with low hygienic requirements. Powder, Granulates, Flakes Ball shape 0 < 8 mm, Good, medium, poor Dry, damp, not abrasive, product...

 Open the catalog to page 4

All Motan-colortronic gmbh catalogs and technical brochures

  1. ALARMcollector

    1 Pages

  2. SPECTROFLEX

    4 Pages

  3. MIXER MODULE

    2 Pages

  4. GRAVICOLOR

    4 Pages

  5. METRO G

    8 Pages

  6. CONTROLnet

    6 Pages

  7. LUXOR A

    8 Pages

  8. GRAVIPLUS

    4 Pages

  9. SPECTROCOLOR G

    6 Pages

  10. METRO P

    4 Pages

  11. LUXOR HD

    2 Pages

  12. C-FLEX

    4 Pages

  13. SPECTROCOLOR V

    4 Pages

  14. MINIBLEND V

    4 Pages

  15. Storage

    2 Pages