Catalogue - Attachment Chain - Morse - (Version JPG)

See other catalogues for Morse

Bevel gear reducer, Overrunning clutch, Right angle gear reducer, Conveyor chain, One way clutch

Text version of the page

DIMENSIONAL DATA - BASE CHAINS Basic Chain Construction

High quality Morse roller chain is used as the foundation for an infinite number of attachment chain possibilities.

standard series-single strand


	Dimensions (Inches)									Average Tensile Strength	Weight Per Foot
Catalog No.	Pitch	W-Roller	DRoller	C-Pin Dia.	F-Plate Thick-	L-Width Over	H-Inside Plate	tN	t M
		Width	Dia.	C-Pin Dia.	ness	Pins	Height
*25	1/4	1/8	.130	.0905	.030	.312	.234	.156	.188	875	.09		—
*35	3/8	3/16	.200	.141	.050	.466	.350	.233	.267	2100	.21
41	1/2	1/4	.306	.141	.050	.530	.383	.256	.322	2000	.25
40	1/2	5/16	.312	.156	.060	.630	.466	.315	.380	3700	.42
50	5/8	3/8	.400	.200	.080	.790	.584	.395	.460	6100	.69
60	3/4	1/2	.468	.234	.094	.990	.700	.495	.586	8500	1.00	\
80	1	5/8	.625	.312	.125	1.274	.934	.637	.741	14500	1.71	I
100	1-1/4	3/4	.750	.375	.156	1.555	1.166	.778	.923	24000	2.58	¹ ((
120	1-1/2	1	.875	.437	.187	1.960	1.400	.980	1.150	34000	3.87	\
140	1-3/4	1	1.000	.500	.219	2.117	1.634	1.059	1.215	46000	4.95	PITCH
160	2	1-1/4	1.125	.562	.250	2.522	1.866	1.261	1.451	58000	6.61
200	2-1/2	1-1/2	1.562	.781	.312	3.120	2.250	1.560	1.777	95000	10.96	» V

C^J-j W I—

: I :

heavy series-single strand


60-H	3/4	1/2	.468	.234	.125	1.115	.700	.558	.627	8500	1.22
80-H	1	5/8	.625	.312	.156	1.400	.934	.700	.804	14500	2.03
100-H	1-1/4	3/4	.750	.375	.187	1.684	1.166	.842	.986	24000	3.00
120-H	1-1/2	1	.875	.437	.219	2.090	1.400	1.045	1.214	34000	4.30
140-H	1-3/4	1	1.000	.500	.250	2.241	1.634	1.121	1.276	46000	5.50
160-H	2	1-1/4	1.125	.562	.281	2.646	1.866	1.323	1.513	58000	7.20
200-H	2-1/2	1-1/2	1.562	.781	.375	3.374	2.334	1.687	1.904	95000	12.30

*Rollerless.

tFor cotter chain and connector link clearance.

conveyor series

Conveyor series double pitch roller chain has heavy series thickness sideplates with full-contact edges for longer wear. This style chain is designed especially for conveyor applications where the chain will slide over a surface. Conveyor series is also available with large rollers to eliminate normal sliding friction losses. Conveyor chains that support the load should have large rollers to minimize the horsepower requirements.

K-_tM=l t^N

"1^H h"

-i -i


		*■ -*
		■ i	A


Chain	Dimensions (Inches)									Av. Ult. Strength Lbs.
									Wt. Per Ft.
		Roller		Pin	Pin Length		Side Plate
No.	Pitch			Diam. C
No.	Pitch	Diam. D	Width W	Diam. C	Riveted L	Cotter M	Height H	Thick F	Lbs.
C-2040	1	.312	5/16	.156	.630	.700t	.466	.060	.34	3700
C-2050	1-1/4	.400	3/8	.200	.790	.870t	.584	.080	.56	6100
C-2060H	1-1/2	.468	1/2	.234	1.115	1.207	.700	.125	1.01	8500
C-2080H	2	.625	5/8	.312	1.400	1.504	.934	.156	1.67	14500
C-2100H	2-1/2	.750	3/4	.375	1.684	1.828	1.166	.187	2.47	24000
C-2120H	3	.875	1	.437	2.090	2.259	1.400	.219	3.56	34000

c-l

t1" and 1V4" pitches are stocked in rivet type only. Cottered pin length is pin length for connecting link.

conveyor series-large rollers

-i


Chain	Dimensions (Inches)									Av. Ult. Strength Lbs.
									Wt. Per Ft.
		Roller		Pin	Pin Length		Side Plate
No.	Pitch			Diam. C
No.	Pitch	Diam. D	Width W	Diam. C	Riveted L	Cotter M	Height H	Thick F	Lbs.
C-2042	1	.625	5/16	.156	.630	.700	.466	.060	.58	3700
C-2052	1-1/4	.750	3/8	.200	.790	.870	.584	.080	.88	6100
C-2062H	1-1/2	.875	1/2	.234	1.115	1.207	.700	.125	1.48	8500
C-2062H-T*	1-1/2	.875	1/2	.234	1.115	1.207	.700	.125	1.00	8500
C-2082H	2	1.125	5/8	.312	1.400	1.504	.934	.156	2.40	14500
C-2102H	2-1/2	1.562	3/4	.375	1.684	1.828	1.166	.187	3.96	24000
C-2122H	3	1.750	1	.437	2.090	2.259	1.400	.219	5.56	34000

*Morse Thermoplastic Roller Chain offers a smooth, quiet chain with reduced weight.

Call us direct at 1-888-EPT-SCC3

Attachment Chain - Morse - #5

Bevel gear reducer, Overrunning clutch, Right angle gear reducer, Conveyor chain, One way clutch