Text version of the page

CERAMIC SHEATH TUBES

SILLIMANTIN 60PYTHAGORASALSINT 99.7

Type C 799 according to DIN EN 60672Al Type C 530 according to DIN EN 60672 Al
2 O
3 -content 99.7 %
2 O
3 -content approx. 60 %, Alkali-content 3 %
2 O
3 -content 73 – 75 % Type C 610 according to DIN EN 60672Al
Outer / InnerØ in mm0.8 x 0.31.3 x 0.71.6 x 1.01.8 x 1.2 2.0 x 1.0 2.7 x 1.7 3.0 x 2.04.0 x 2.05.0 x 3.0 6.0 x 4.0 8.0 x 5.0 9.0 x 6.0 9.6 x 6.410.0 x 6.010.0 x 7.0 Outer / InnerØ in mm12.0 x 8.012.7 x 8.914.0 x 10.015.0 x 10.0 17.0 x 12.0 17.0 x 13.0 17.5 x 11.120.0 x 15.024.0 x 18.0 25.4 x 19.1 26.0 x 20.0 28.0 x 22.0 30.0 x 23.0 Outer / InnerØ in mm0.8 x 0.31.3 x 0.7 1.6 x 1.01.8 x 1.22.0 x 1.0 2.7 x 1.7 3.0 x 2.0 4.0 x 2.05.0 x 3.06.0 x 4.0 8.0 x 5.0 9.0 x 6.010.0 x 6.0 10.0 x 7.0 12.0 x 8.0 Outer / InnerØ in mm14.0 x 10.015.0 x 10.0 15.0 x 11.016.0 x 12.017.0 x 12.0 17.0 x 13.0 17.5 x 11.1 20.0 x 15.024.0 x 19.025.4 x 19.1 26.0 x 18.0 26.0 x 20.0 28.0 x 22.0 30.0 x 23.0 Outer / InnerØ in mm15 x 1020 x 15 22 x 1724 x 1926 x 18 28 x 22 30 x 23 max. length 3500 mm depending on outer Ømax. length 3500 mm depending on outer Ømax. length 3500 mm depending on outer Ø

HALSIC-IHALSIC-RSILICON CARBIDE

According to DIN EN 12212, reaction-bound, Si-infiltrated SiC, SiC-concentrationapprox. 90 %, Si-free content ca.10 %According to DIN EN 12212recrystallized SiC, SiC-content 99 %fine and course structure, SiC-content approx.70and 90 %, clay-bound
Outer / InnerØ in mm17 x 1220 x 12 20 x 15 22 x 17 24 x 1926 x 1826 x 20 Outer / InnerØ in mm30 x 2333 x 28 35 x 27 40 x 32 45 x 25 45 x 35 50 x 25 Outer / InnerØ in mm20 x 1022 x 12 25 x 15 30 x 15 30 x 2032 x 22 Outer / InnerØ in mm34 x 2435 x 25 38 x 25 40 x 30 45 x 35 50 x 38 Outer / InnerØ in mm20 x 1322 x 15 25 x 18 27 x 20 30 x 2045 x 35 max. length 2000 mm depending on outer Ømax. length 2100 mm depending on outer Ømax. length 2100 mm depending on outer Ø

Dimensions not included in the table can be custom made upon request. All of the following tubes are available: both ends open, one end closed, both ends open with flange, one end closed with flange. Tolerances are in compliance with DIN 40 680. Customized tolerances upon request.

3