| | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 17BW Multiple Lead Wide Blade Thermode | | |
| | | |
| | | Thermode Material_W (inch) D (inch) 17BW1200 Stainless Steel, Chrome Plated 1.200 .060 17BW2187 Stainless Steel, Chrome Plated 2.187 .060 17BW2500 Stainless Steel, Chrome Plated 2.500 .060 Note: Mounts to 90RA and 180RA style heads. | | |
| | | |
| | | • Application - Ideal for reflow soldering at operating temperatures up to 600°C. | | |
| | | |
| | | • 1.2 to 2.5 inch length faces available with thermocouple feedback. Special order other sizes. • Stainless steel construction gives long life. • Profiled blade shape for uniform heating. • Integrated cooling air tube reduces cooling time and increases throughput. • Dual mounting system: fixed mounting hardware eliminates movement for critical applications. • Self aligning pivot type mounting hardware ensures that the thermode face seats firmly against parts for optimum heat transfer. • Custom sizes available. | | |
| | | The ability to withstand operating temperatures up to 600°C makes the wide blade thermode an ideal choice for reflow soldering ribbon cable wires, covered with polyimide insulation, to printed circuit board pads. | | |
| | | |
| | | |
| | | 17B Multiple Lead Blade Thermode | | |
| | | |
| | | Reflow solder copper bus wire to circuit board pads in a single operation using .220 wide blade thermode. | | |
| | | |
| | | • Application - Use tips up to .220 inches wide for bonding subminiature components to rigid substrates. Tips up to 1.00 inch wide can bond multiple fine wire and small ribbon cable to rigid substrates. • Long length-to-width ratio makes this thermode ideal for reaching over components and into crowded spaces. • Low cost etched construction with thermocouple feedback and strain relief. • Profiled tip ensures even heat distribution. • J type thermocouple (K & E type optional). | | |
| | | Bond fine wires to circuit board pads using .770 inch wide blade thermode. | | |
| | | |
| | | |
| | | | | | | | | | | | Thermode | Material | W (inch) | D (inch) | | | | 17BM070 | Molybdenum | .075 | .030 | | | | 17BM180 | Molybdenum | .220 | .030 | | | | 17BM360 | Molybdenum | .400 | .030 | | | | 17BM770 | Molybdenum | .810 | .030 | | | | 17BM870/30 | Molybdenum | .870 | .030 | | | | 17BM1000 | Molybdenum | 1.000 | .030 | | | | | | | | | | | |
| | | |
| | | Note: Mounts to 50FRF, 50ARF, 87A and 87F style heads. | | |
| | | |
| | | 3 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | |