| | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Wide Range of Part Processing Capabilities | | |
| | | |
| | | • Operates as tacker only, sealer only, or combined tacker-sealer • Four-pass welding feature starts weld from center and welds to the part corner - for large part sealing • Set different energy levels for each axis welded for higher yields on rectangular parts • Many tacking options - tack center, four-side tacking, multiple tacking • Real time monitoring of weld inhibit inputs such as moisture, oxygen, and helium levels • Unlimited weld schedule storage • Optional lid hold down feature assists tacking process | | |
| | | |
| | | | | | | | | | | | ContJitionirtg PufsQ | 0 Weill Raise | | | | | ..... | ^^^h ■ ■ ■ | | | | | | | | | | | | H | | | | | | | | | | | | | | | | | T 1 | M E | | | | | | | | | | |
| | | Leading Edge Software Options Batch Reporting Software option records lot number, operator, time, date, sealing schedule name, part serial number • Provides process and part traceability • Exportable via .CSV format WM3000 Weld Monitor Software option provides real-time and historical process analysis Compares actual measurements to entered process setpoints Informative graphical analysis screens | | |
| | | Higher Yields With Advanced HF25 Inverter Power Supply • 25 kHz feedback rate for closed loop electrical current control • Automatically compensates for variations in lid-to-part dimensions and electrical properties • Conditioning weld pulse brings each part to same resistance prior to application of welding current • Weld pulse shaping feature ramps energy up or down to reduce cracking and leaks • Energy output is independent of input line voltage fluctuations SPECIFICATIONS | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | Part Size: | 5mm - 203mm (0.2 inches - 8 inches) | HF25 Pulse Width: | 0.3 to 2000 milliseconds | | | | Positioning Accuracy: | ±0.038mm (±0.0015 inches) | Input Power - | 192-264VAC, 50/60 Hz, 25 amps, 3 PH or | | | | Weld Force (Programmable): | 500 to 5000 grams | HF25 Power Supply: | 320-440VAC, 50/60 Hz, 13 amps, 3 PH | | | | | 200-500 grams (option) | Compressed Gas Requirements: | 60 psi minimum | | | | Weld Linear Speed: | Up to 38mm (1.5 inches) per second | Mechanism Input Power: | 115 VAC 50/60 Hz, 15 amps | | | | Rotary Speed: | 0 to 28.8°/second - 720° Max. rotation | Calibration: | To NIST standards | | | | HF25 Current Output: | 50 to 2400 amps, ±2 amps | | | | | | | | | | | | |
| | | |
| | | Spi'r/tflf fnno vation» H? MIYACHI Miyachi Unitek Corporation 1820 S. Myrtle Ave. P.O. Box 5033 • Monrovia, CA 91017-7133 USA Tel: (626) 303-5676 • FAX: (626) 359-7930 E-Mail: sales@unitekbenchmark.com Internet http://www.miyachiunitek.com | | |
| | | Your Local Representative | | |
| | | |
| | | CD o 3 o | | |
| | | |
| | | Specifications subject to change without notice. Copyright© 2006 Miyachi Unitek Corporation. The material contained herein cannot be reproduced or used in any other way without the express written permission of Miyachi Unitek Corporation.All rights reserved. | | |
| | | CM o 55 ai | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | |