| | | | |
| | Available Models: | IPB-5000A/200-240 IPB-5000A/380-480 | |
| | | ITB-780A6 - Transformer included with system | |
| | Line Voltage, 50/60 Hz: | 200 to 240 VAC, 3-Phase | 380 to 480 VAC, 3-Phase | |
| | Primary Current: | 200 Amps | |
| | Primary Frequency: | 5 kHz | |
| | Feedback Modes: | Secondary Constant Current, Secondary Constant Voltage, Secondary Constant Power, Combination Mode | |
| | Current Setting Range: | 0.6 to 4.0 kA | 0.6 to 6.0 kA | |
| | Voltage Setting Range: | 0.30 to 9.99 V | |
| | Power Setting Range: | 0.2 to 13.3 kW | 0.2 to 20.0 kW | |
| | Weld Schedules: | 127 | |
| | Cooling Method: | Internal Fan | |
| | Monitor Modes: | Pre Weld Check, Comparator, average / peak (4 allowed). Envelope (single parameter). | |
| | Valve Voltage: | 24 VDC | |
| | Time Setting Range: | Squeeze Time: 0000 to 9999 ms (1.0 ms increments) | |
| | Upslope 1 & 2: 000.0 to 100.0 ms (0.2 ms increments) | |
| | Weld Time 1 & 2: 000.0 to 100.0 ms (0.2 ms increments) | |
| | Downslope 1 & 2:000.0 to 100.0 ms (0.2 ms increments) | |
| | | |
| | Cool Time 00.0 to 98.8 ms (0.2 ms increments) | |
| | Hold Time: 000 to 999 ms (1.0 ms increments) | |
| | Inputs / Outputs: | Inputs: Weld On / Off; Weld Interrupt (weld to displacement); Program Protect; Count Reset; Remote Schedule; Parity (WE1 Stop); Error Reset; 2 Level Start; Emergency Stop Outputs: Good / NG (no good); Count UP; Ready; End; Solenoid 1 & 2; Caution | |
| | Operational Environment: | Temperature 5-40° C / Humidity 90% or less (no condensation). | |
| | ITB-780AG Welding Transformer Specifications (Included with System) | |
| | Rated Capacity: | 17.4 kVA | |
| | Input Voltage: | Selectable for all IPB-5000A's | |
| | Frequency: | 5 kHz | |
| | Secondary Volts,No Load: | 13 V | |
| | Max Secondary Current: | 6 kA | |
| | Max Duty Cycle: | 2.5% at 6 kA | |
| | Cooling Method: | Internal Fan | |
| | | | |