| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | SERIES 359 — Checking R-contour of ball endmill | | |
| | | |
| | | FEATURES With the Ball Endmill measuring unit the operator can check for abrasion wear while checking the R-contour after re-grinding or during grinding the ball- end. Periodically checking for abrasion wears in the ball endmill's R-contour helps the user forecast when to replace or re-grind the ball-end, thus ensuring a stable processing accuracy. This also helps to reduce the running cost of the ball endmill while Increasing work efficiency. | | |
| | | From setting a reference point to measuring R-contour, the operation is made simple All you have to do to carry out the entire measurement procedure Is to simply enter measuring conditions In the menu of the ball endmill measuring program. | | |
| | | • Periodically check R-contour, In order to improve processing accuracy • Access the condition of R-contour after re-grinding the tool end • Generate a report of the R-contour measurement result • Save clear images of the tool end in file | | |
| | | |
| | | Digital rotary heads providing high-accuracy indexing Equipped with digital micrometer heads that can switch displays between 0.1 and 1 degrees, thus providing high-accuracy Indexing of angles. | | |
| | | |
| | | |
| | | | | |
| | | |
| | | |
| | | QSPAK and ball endmill extension program | | |
| | | |
| | | Measurement result of R-contour Is graphically displayed to allow the assessment of contour accuracy at a glance. | | |
| | | Angle counter - | | |
| | | |
| | | Digital rotary head | | |
| | | |
| | | |
| | | Report generation function for easily generating reports Measurement result can be easily made Into a report, which can later be used as a shopfloor setting data sheet after re-grlndlng or an abrasion status data sheet. | | |
| | | |
| | | System configuration • Ball endmill measuring unit (359-655*) Digital rotary head Ball endmill extension program •Suffix: A for 100V, D for 220V, E for 240V •QSPAK (measuring program) •Collet chuck set SetA(12AAG241): 02.5 to 05.0mm 5 pcs./set Set B (12AAG242): 05.5to0lO.Omm 5 pcs./set SetC(12AAG243): 0lO.5to0l5.Omm 5 pcs./set Set D (12AAG244): 015.5 to 020.0mm 5 pcs./set | | |
| | | Saving image files Images of the tool edge conditions, such as the state of finish and wear, can be saved In \ digital file. | | |
| | | |
| | | R-contour measurementwith high-accuracy by the use of image processing A Industrial ccd camera is used In image processing for position detection, In order to avoid focus error and to thereby ensure high-accuracy R-contour measurements. This also increases measuring efficiency and helps reduce labor. | | |
| | | Digital rotary head | | |
| | | |
| | | |
| | | |
| | | Collet chuck | | |
| | | |
| | | Setting a reference Measuring Measuring point on shank R-contour of blade R-contourata edge different position | | |
| | | |
| | | Mitutoyo | | |
| | | 387 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |