Catalogues - digital-indicator

Catalogue Digital indicator

www.mitutoyo.com

Page

/ 13

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

/ 13

See other catalogues for MITUTOYO

Text version of the page

ABSOLUTE Digimatic Indicator ID-C

SERIES 543 - Standard Type FEATURES

• As compact as standard Series 2 dial indicators.

• Large, easy-to-read LCD.

• ZERO/ABS key: Allows the display to be Zero-Set at any spindle position for comparison measurements. This switch will also allow return to the absolute coordinate and display of the true position from the origin point.

SPC

ABSOLUTE"

• GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.

• The positive/negative count resulting from the spindle's up/down movement can be toggled.

• Unlimited response speed eliminates spindle over-speed errors.

• The ID-C indicator face can be rotated 330 ⁰ to an appropriate angle for easy reading.

•With SPC data output.

Absolute System Potented by MITUT0Y0

(Refer to the page 9 for details.)

Technical Data

Accuracy: Refer to the list of specifications

(excluding quantizing error) Resolution: 0.01mm, 0.001mm, .000570.01mm,

.000170.001mm or .0000570.001mm Display: LCD

Length standard: ABSOLUTE electrostatic capacitance type

linear encoder Max. response speed: Unlimited Measuring force: Refer to the list of specifications Stem dia.: 8mm (ISO/JIS type) or 3/8" (ANSI/AGD type) Contact point: Carbide ball with M2.5x0.45 (ISO/JIS type)

Carbide ball with #4-48UNF (ANSI/AGD type) Battery: SR44 (1 pc), 938882 Battery life: Approx. 5,000 hours under normal use Dust/Water protection level: IP42 or IP53 (dust-proof type)

Function

Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (inch/mm models)

Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

Optional Accessory

905338: SPC cable (1m)

905409: SPC cable (2m)

902011: Spindle lifting lever (ISO/JIS type)*

902794: Spindle lifting lever (ANSI/AGD type)*

137693: Spindle lifting hook**

540774: Spindle lifting cable

125317: Spare rubber boot (for dust-proof type)

02ACA571: Auxiliary spindle spring for 25mm/1" models***

02ACA773: Auxiliary spindle spring for 50mm/2" models***

--: Backs (See page 266.)

--: Contact points (See page 264.)

*Can be used on 12mm/.5" models only.

**Can be used on 25mm/1" or 50mm/2" models.

***Required when orienting the indicator upside down.

234