Catalogues - digital-indicator

H ' \ BPointD**

PointA \П/"

PointC

Catalogue Digital indicator

www.mitutoyo.com

Page

/ 13

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

/ 13

See other catalogues for MITUTOYO

Text version of the page

ABSOLUTE Digimatic Indicator ID-F

SERIES 543 - with Back-lit LCD Screen

SPC

ABSOLUTE"

FEATURES

•With the ABSOLUTE Linear encoder technology, once the measurement reference point has been preset itwill not be lostwhen the power is turned on.

• GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.

• An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances the ease of operation in the same manner as a dial indicator. The display range of the analog bar can be changed.

• With SPC dataoutput.

Abnluh System Patented by IflUTOYO

(Refer to the page 9 for details.)

Technical Data

Accuracy: Refer to the list of specifications

(excluding quantizing error) Resolution: 0.01mm/0.001mm or .000057.00017.0005"

/.001"/0.001mm/0.01mm Display: LCD

Length standard: ABSOLUTE electrostatic capacitance type

linear industrial encoder Max. response speed: Unlimited Measuring force: 1.8N/2.3N* orless (*50mm range models) Stem dia.: 8mm (ISO/JIS type) or 3/8" (ANSI/AGD type) Contact point: Carbide ball with M2.5x0.45 (ISO/JIS type)

Carbide ball with #4-48UNF (ANSI/AGD type) Power supply: 9V DC(viaAC adaptor)

Function

Origin-set/Preset, Zeroset, GO/±NGjudgment, Max/Min value hold, Runout measurement, Resolution switching, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (inch/mm models)

Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

OptionalAccessory

936937: SPC cable (1m) 965014: SPC cable (2m) 21EAA131: RS-232C cable (2m) 540774: Spindle lifting cable (stroke: 10mm) 02ACA571: Auxiliary spindle spring for25mm/1" models* 02ACA773: Auxiliary spindle spring for 50mm/2" models*

• The maximum, minimum, or runoutvalue can be displayed during measurement.

DigimaticMin-processorDP-1VR Digimatic presetter Granite comparator stand Comparator stand Comparator stand

---: Backs (See page 266.)

---: Contact points (See page 264.)

•Required when orienting the indicator upside down.

SPECIFICATIONS

Inch/Metric

Metric


Resolution	Order No.*	Range	Accuracy
0.001mm,0.01mm	543-551	25mm	0.003mm
	543-557	50mm	0.003mm
	543-553	50mm	0.006mm


Resolution	Order No.*	Range	Accuracy
.00002", .00005", .0001", .0005", .001", 0.001mm, 0.01mm	543-552	1"	.00012"
	543-558	2"	.00012"
	543-554	2"	.00024"

* To denote yourAC line voltage add the following suffixes to the order No. A for 120V Kfor 100V D for 220V E for 240/220V DC forChina No suffix is required for 100V

* To denoteyourAC line voltage add the following suffixes to the order No. A for 120V Kfor 100V D for 220V E for 240/220V DC forChina Nosuffix is required for 100V

Application

Difference/Runout measurement Example: Indicator travel from points AtoD

Difference (or Total Runout)is displayed as A. Dimensions B (maximum value) and C (minimum value) can be recalled from memory with a simple key sequence.

PointB

DIMENSION

Unit: mm

ISO/JIS Type


		66
		019.2

	о

I

43.3

in ID in

oo I col

ID О

CO О

m in Ю

Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.

Note 2: Inch (ANSI/AGD Type) dial indicator is provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.

( ): for 30.4mm models

toyo

241