Catalogues - calibration-1

Catalogue Calibration_1

www.mitutoyo.com

Page

/ 3

Contact the
Manufacturer

Where to buy
this product ?

Request
a Quote

/ 3

See other catalogues for MITUTOYO

Text version of the page

Step Master

SERIES 516 FEATURES

Step master is a master gage used for • Each adjacent step is measured down to

the z-axis (vertical direction) calibration of 0.01pm by using a interferometer within optical instruments. ±0.20um allowance.

Order No. Step value between adjacent blocks Remarks


	No. 1-N0.2	No.2-No.3	No.3-No.4	No.4-No.5 I
516-198	10pm	5pm	2pm	1pm	Steel type
516-199	300pm	100pm	50pm	20pm	Steel type
516-498	10pm	5pm	2pm	1pm	Ceramlctype
516-499	300pm	100pm	50pm	20pm	Ceramlctype

Made-to-order Block & Reference

Available Dimension

Nomlnalslze: 0.1mmto 1000mm(steel)

0.5mm to 500mm (ceramic) Nominal pitch: 0.0005mm (up to 100mm)

0.001mm(over100mm) Minimum section dimension:

Approx. 5 x 5mm Maximum section dimension:

Approx. 140x140mm(steel) Approx. 0160mm (steel, cylindrical) Approx. 100x 50mm(ceramlc) Approx. 060mm (ceramic, cylindrical) Accuracy: Gauge block level

Special materials oflow expansion glass andlow expansion ceramic are available.

FEATURES

• Mitutoyo can provide Gauge Blocks and reference gages to you size and design.

O: Steel Long rectangular block (15 x 10 x200mm) P: Ceramic square block (24.1 x 24.1 x 12.3mm) Q: Steel thin rectangular block (30 x6 x1.9mm) R: Steelsquareblock(9x9x6mm) S: Steel thin rectangular block(30x6x2.1mm) T: Steel cylindrical bock (013.08 x12mm)

■L. ^c

A: Ceramic rectangular gauge block (21.94mm)

B: Ceramic square gauge block (2.1005mm)

C: Steel square gauge block (10.72mm)

D: Steel square gauge block (2.2065mm)

E: Ceramic rectangular gauge block (20.64mm)

F: Steel rectangular gauge block(31.5mm)

G: Ceramic rectangular gauge block (6.34mm)

H: Steel rectangular gauge block(3.603mm)

I: Steel rectangular gauge block (1.1 505mm)

J: Steel rectangular gauge block (0.555mm)

K: Steel rectangular gauge block (6.156mm)

L: Steel rectangular gauge block (9.694mm)

M: Steel rectangular gauge block(10.02mm)

U: Cylindrical reference blockfor depth micrometer (06O x 150mm)

V: Ceramic reference plate (50 x 50x 50mm, flatness 0.3pm) W: Ceramic stepped block (30 x18x 5mm, step: 0.15mm)

Mitutoyo

209