Catalogs >
Mitsubishi Electric Europe B.V. >
Frequency inverter - FR-F800

Frequency inverter - FR-F800
4Pages

Catalog excerpts

A MITSUBISHI ELECTRIC Changes for the Better FACTORY AUTOMATION ■ Ideal for pump, compressor and fan applications ■ High savings potential to reduce TCO ■ High starting torque maximum energy saving ■ Built in Ethernet interface available at -E2 Version Enhanced control due to expanded PID functionality

Open the catalog to page 1

The ideal drive solution for pumps and fans This is done without the troublesome adjustment of parameters (acceleration/ deceleration time, torque boost, etc.). Powerful features and intelligent functions Detection of mechanical faults With the load characteristics measurement function, 5 speed-torque values of the load can be detected and stored automatically. By comparing the present speed/load status with the stores speed/ load characteristics, out-of-range warnings can be accurately measured and quickly acted upon, meaning unnecessary alarms/line stops can be avoided. Pump applications,...

Open the catalog to page 2

Advanced PID control functions The inverter can perform PID control of the motor operation and control the external equipment at the same time. During PID control the drive will activate “sleep mode” to avoid energy loss, when deviation is small and output speed is low. As soon deviation becomes bigger again the drive will start up immediately. One drive can control multi pumps Second PID controller Clogged filter, clogged pipe, etc. Fault detection width < ight load range> L Broken belt, broken blade, idling, etc. PID operation unit 1 PID operation unit 2 Manipulated Motor amount 1 M...

Open the catalog to page 3

Specifications Type Operating conditions 1 SLD= Super light duty (110 % at 60 s, 120 % at 3 s); LD= Light duty (120 % at 60 s, 150 % at 3 s) ® The FR-F842 models must be operated in combination with a converter unit FR-CC2, which has to be ordered seperately. For more details please refer to the inverter family catalogue. @ The FR-F840-E2 version provides a built in Ethernet port, supporting Modbus® TCP, CC-Link IE Field Basic and BACnet TCP. European Offices Representatives Mitsubishi Electric Europe B.V Mitsubishi-Electric-Platz 1 D-40882 Ratingen Phone: +49 (0)2102 / 486-0 Germary...

Open the catalog to page 4

Frequency inverter - FR-F800 4Pages

Catalog excerpts

All Mitsubishi Electric Europe B.V. catalogs and technical brochures

Frequency inverter - FR-F800
4Pages