video corpo

GT16 Handy Brochure
2Pages

{{requestButtons}}

Catalog excerpts

GT16 Handy Brochure - 1

Power supply specifications Convenient GT16 functions : Program monitor Ladder editor Edit Document display Find/Replace Convert Servo amplifier monitoring function Display Online Logging data display Other functions : Backup restoration Operator authentication function Q motion monitoring function Q SFC monitoring function System monitoring function Network monitoring function Intelligent unit monitoring function A/FX list editing function and more General specifications Item Input power supply voltage Power consumption When back light is OFF Rush current Allowable momentary power failure period Item Ambient operating temp. Ambient storage temp. Ambient operating/ storage humidity Vibration resistance Impact resistance Specifications 24 VDC (+10%, −15%) 11.6 W or less (480 mA, 24 VDC) 8.2 W or less (340 mA, 24 VDC) 30 A or less (2 ms, at max. load) Within 5 ms Performance specifications Item Display area Type Resolution (dots) Display size (mm) Number of displayed characters Display colors View angle (degrees) Intensity (cd/m2) Intensity adjustment Life expectancy Back light Touch panel Type Key size (dots) Simultaneous pressing (2 touch keys) Life expectancy Buzzer output Memory C drive Life expectancy Battery Backup target Life expectancy Built-in interface Connector shape Application Ethernet Type Connector shape Application Type Connector shape Application Type Connector shape Application Applicable software packages Type Connector shape Application Screen design software Simulation software Noise resistance Specifications TFT type color LCD (high-brightness wide viewing angle) 640 x 480 132.5 W x 99.4 H (6.5 inch) 16-dot font: 40 characters x 30 lines 12-dot font: 53 characters x 40 lines 65,536 colors 80º leftward and rightward, 60º upward, and 80º downward 550 8 steps, adjustable Approximately 41,000 hours (Ambient operating temperature: 25 ºC) LED (not replaceable) Back light OFF time and screen save time can be set. Analog resistive film type 2 x 2 minimum (per key) Not prermitted 1,000,000 times or more (operation force: 0.98 N or less) Single tone (adjustable between long, short, and none) Built-in flash memory for storing project data (15 MB) and OS 100,000 times (number of writes to the memory) Lithium battery GT15-BAT Clock data, maintenance time notification data, system log data, and SRAM user area (500KB) Replacement timing: Approximately 5 years (Ambient temperature: 25 ºC) 1 channel each (When using, select one of the channels.) Transmission speed: 115,200/57,600/38,400/19,200/9,600/4,800 bps Square, 42-pin type (male) Communication with connected devices Data transmission system: 100BASE-TX,10BASE-T, 1 channel Square, 42-pin type (male) Communication with connected devices, gateway function, connection to personal computer (project data upload/download, OS installation) USB (full speed: 12 Mbps), host 1 channel A (receptacle) Data transfer and storage USB (full speed: 12 Mbps), device 1 channel Mini-B (receptacle) Communication with personal computer (Screen data upload and download, OS installation and FA transparent function) In conformance to PCMCIA, compact flash slot, 1 channel Dedicated to Type I Data transfer and data storage, GOT GT Works3 Version1.17T or later Dielectric withstand voltage Insulation resistance Working atmosphere Protection structure Specifications 0 to 40 ºC -20 to +60 ºC 10 to 90 %RH (non condensing) In conformance to JIS B3502 and IEC 61131-2 In conformance to JIS B3502 and IEC 61131-2 (147 m/s², 3 times in each of the X, Y and Z directions) Noise voltage: 1000 Vp-p, noise width: 1 μs (Tested using a noise simulator whose noise frequency is 30 to 100 Hz) 500 VAC for 1 minute (between all power terminals and ground) 10 MΩ or more using 500 VDC megger (Between all power terminals and ground) Not corrosive Equivalent to IP65f (except when external connection cable is disconnected or when environmental protection cover is removed) Approximately 1.2 kg (main unit) GRAPHIC OPERATION TERMINAL Switch/indicator LED specifications Item Operation switch Life expectancy Grip switch Emergency stop switch Selector switch with key LED Power LED Operation switch status indicator LED Grip switch status indicator LED Specifications Connected with external connection cable. 6 switches (6 contacts/common) N/O contact, 10 mA /24 V DC 1,000,000 times or more Connected with external connection cable. 3-position (OFF <-> ON <-> OFF) type enable switch (Deadman switch) 2 N/O contacts, Conforms with IEC60204-1:9.2.5.8 Connected with external connection cable. 3 N/C contacts, Safety lock mechanism: IEC60947-5-5, 6.2 Direct opening action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K) Connected with external connection cable. 2-position, 1 A / 24 V DC (resistive load), 0.3 A / 24 V DC (inductive load) 1 LED (Lit in green: Power is ON. Lit in orange: Screen is saved or back light is OFF. Blinking in orange/green: Back light bulb is blown. Not lit: Power is OFF.) 6 LEDs, green (operation controlled by the display area) 1 LED, green (operation controlled by the display area) External dimensions Ergonomic grip design Turn the screen instead of your head! TFT type LCD screen with a greater intensity and wider viewing angle The ergonomic grip design enables the GT16 to be held at natural wrist angle, as well as making the screen easier to read. Designed for left hand use. Ethernet interface standard

Open the catalog to page 1
GT16 Handy Brochure - 2

For storage of large amounts of various types of data The GT1665HS-VTBD Handy GOT incorporates various functions in a compact body with a 6.5-inch TFT type liquid crystal display that's easily held in one hand! GT16 functions controllable at your fingertips! VGA 640×480 Analog type touch panel CF card, USB host, and USB device For transferring data and setting up multiple units For connecting to equipment easier and faster In addition to the built-in memory (15 MB), the (optional) CF card inserted into this interface can a large amount of data such as documents, logging data, and backup...

Open the catalog to page 2

All MITSUBISHI ELECTRIC AUTOMATION catalogs and technical brochures

  1. MELFA Family

    64 Pages

  2. MELFA Family

    64 Pages

  3. QS90SR2SP

    4 Pages

  4. FX3UC

    4 Pages

  5. L Series

    4 Pages

  6. FX Family

    88 Pages

  7. Q/L-Family

    114 Pages

  8. COGNEX

    2 Pages

  9. ME96-NSR

    32 Pages

  10. ME96-SS Series

    32 Pages

  11. ST Series

    4 Pages

  12. GOT1000

    13 Pages

  13. F900

    16 Pages

  14. E1000

    12 Pages

  15. CC-Link

    29 Pages

  16. EnergyPAQ

    2 Pages

  17. M70 Series

    8 Pages

  18. M700V Series

    11 Pages

  19. WS-V Series

    260 Pages

  20. Q Series

    31 Pages

Archived catalogs

  1. Melsec PLC

    85 Pages