GOT1000
13Pages

Catalog excerpts

Mitsubishi Graphic Operation Terminal Tailored solutions to meet your HMI and visualization needs

Servos Amplifiers Programmable Controllers Have you ever needed an HMI to do more than provide pretty panel meters? The GOT1000 does more than just visualization, it provides solutions for both the everyday, Solutions for your FA Device: improving uptime, work efficiency The speed of your business and the speed of your machine hinges on many forces outside of your control. The GOT1000 brings them back under control with speed, performance and industry leading functions that are tailored for visualization - real life solutions for your real time process. Whether your focus is centered on...

Open the catalog to page 2

Five models of the GOT1000 Series to fit demanding All-in-one models with a variety of communication and function features including Ethernet support GOT1000 GRAPHIC OPERATION TERMINAL Multimedia I Video RGB I Network I Bus Serial | TFT (High-brightness, wide viewing Resolution : 1024x768 Display colors : 65,536 colors Multimedia, video/RGB model JTFTfHigh-brightness, wide viewing angle) Resolution : 800 x 600 Display colors : 65,536 colors Multimedia, video/RGB model TFT (High-brightness, wide viewing angle) Resolution : 800 x 600 Display colors : 65,536 colors Multimedia, video/RGB model...

Open the catalog to page 3

CASE STUDY 1 GOT Solutions 1 3 CASE Facility uptime is increased by reducing unexpected errors on the floor. Before GOT Solution Alarm light is on Before One-Touch Ladder Jump function Error When an error is detected, touch switch operations can search for and display the cause of the problem. ST1 (Normal) No need to go back to my desk to get my PC or check ladder programs! ST2 (Error) GOT Solution It may take several workers to debug programs and operate equipment at the same time if the operation and control panels are on different floors. 2F It's difficult to perform debugging without...

Open the catalog to page 4

CASE STUDY 1 GOT Solutions 5 CASE Operator efficiency is improved when manuals and work instructions can be accessed directly from the display. Before GOT Solution Alarm light is on Error B110 Before Document Display function/ Video Manual Playback Work instructions are easy to access and written in a language that I can understand. You can save necessary documents such as manuals on the GOT. With the Document Error! Display function, it's easy to read the Alarm display screen manual by changing 01/11/2007 10:00 Error B110 Directly assign 01/10/2007 10:10 Error B112 and scrolling 01/10/2007...

Open the catalog to page 5

CASE STUDY 2 FA Solutions Obstacles are often encountered when using many different types of FA devices. The following problems can be resolved by linking with GOT1000. GOT Solutions Enabling freedom of unit control. Ideal for PLCs in the field and on the plant floor! Can PLC programs be monitored with the GOT? Ladder monitor function and ladder editor function SFC monitor function Can simple changes to ladder programs be made without a personal computer? Can the root cause be easily identified? General-purpose PLC The Q series (Q mode) SFC programs (MELSAP3, MELSAP-L) can be monitored in a...

Open the catalog to page 6

Making drive control even easier. GRAPHIC OPERATION TERMINAL Powerful functionality that is useful during startup and the tuning process! without opening the panel? Connected with a personal computer, the GOT acts as a transparent gateway to enable programming, startup, and adjustment of equipment Configurator. Users do not have to bother with opening the cabinet or changing cable connections. System monitor function Motion controller devices can be monitored and changed. For direct connection of servo amplifiers to GOTs! servo amplifiers be validated? Servo amplifier monitor function In a...

Open the catalog to page 7

Simplifying inverter control. General-purpose Inverter Ideal for inverter startups and operation! without opening the panel? Directly connect inverters Up to 31 inverters can be connected to a single GOT over a total FREQROL-F700P/F700PJ inverters can automatically configure the communication parameters for GOT connection, making connections Connected with a personal computer, the GOT acts as a transparent gateway to enable startup and adjustment of equipment using FR Configurator. Users do not have to bother with opening the cabinet or changing cable connections. GRAPHIC OPERATION...

Open the catalog to page 8

Powerful functions for robotic systems! personal computer used for setup be consolidated into a single unit? • Robot operation screen • Robot current position monitor screen • Load rate/current value display screen • Maintenance forecast screen panel operations Consolidate and centralize robot monitoring and control functions on production floor using the GOT Even if a teaching box is not available, the GOT can be used to operate the robot and easily check the current position data and error details. Consolidating panel operations into the GOT improves operation and maintenance work...

Open the catalog to page 9

Powerful function for CNC startup, machining and changeover! Data, such as machining programs and parameters, can be copied from a GOT CF card or USB memory to the CNC C70 and vice versa. Data can be deleted as well. System monitor function Embedded monitoring utilities are available enabling users to view and change CNC C70 and MELDAS C6/64 device values. easily validated? GRAPHIC OPERATION TERMINAL^iM ^^BH without opening the panel? Connected with a personal computer, the GOT acts as a transparent gateway to enable start up and adjustment of equipment using NC Configurator, etc. Users do...

Open the catalog to page 10

^^P^^j^^Sl^j^S)^ GRAPHIC OPERATION TERMINAL^BH ^^■^■^H ^^■^■^K ^^■^■^K Powerful functions for vision systems! Displaying the In-Sight Series processing By connecting a GOT to the In-Sight Series and PLC over Ethernet, the In-Sight Series processing results can be displayed and parameters can be changed on the GOT. The GT16 model has a standard Ethernet port, allowing the system to be built easily. * : A RS-232 connection is required to directly exchange data with GOT and Dataman. (Ethernet connection is not supported.) Connect to various COGNEX products The In-Sight vision system and...

Open the catalog to page 11