Catalogs >
Misumi America >
SHOT COUNTERS FOR MOLD

SHOT COUNTERS FOR MOLD
1Pages

Catalog excerpts

SLOTTED KEYS SHOT COUNTERS FOR MOLD V Non JIS material definition is listed on P.1359 - 1360 V Manufactured by PROGRESSIVE Corporation. Counter View is a trademark of PROGRESSIVE Corporation. PAT. PEND. KES KESS (Stainless steel) KEG KEGS (Stainless steel) B/2 KEG 14 KEGS (Stainless steel) Fixed mold plate Movable mold plate L dimension can be designated in 1mm increments. Movable mold plate Part Number U/Price Part L Number 0.1mm increments 19 Movable mold plate (Movable mold plate side chart) ■Method of specifying the L dimension LMovable mold plate thickness Tactuator rod protrusion of 4.0mm V Specify taking into account the tolerance of the mold plate thickness T. V The protruding part of the actuator rod is the stroke of the actuator rod. If the stroke is less than 3.75mm, the counter will not work. Conversely, if the stroke exceeds 4.25mm, the counter may be damaged when the mold closes. ・Counting is actuated mechanically, no miscount will occur if counter is installed correctly. E ・ ach counter has a different serial number that will be used to identify the counter with the mold. V Counters are sold in random order. I ・D Plate for tool identification is included for M-CVPL and M-CVEX only. Apply the adhesive seal at the back of the ID Plate to the front of the counter. V The Counter is non-resettable mechanical. V For mold testing purposes, the 7-digit indicator does not start from 0(a value of 9999980 will be shown). V MCVR Counter: Ensure that the actuator rod has a stroke of 4.0mm±0.25. Part Number MCVPL MCVEX MCVR Quantity Rate 3 V Stock availability depends on subsidiary. X P.45 ■Quantity discount rate X P.45 Shot Counter Part Number Mold Closed V Installation dimension shown in above figure is just for reference purpose. V Stroke distance of the counter pin for counting function is set at 3.75mm or more. If the stroke is less than 3.75mm, the counter will not work. Conversely, when the stroke exceeds 4.25mm, the counter may be damaged. Part Number Actuation Block (Movable mold plate side chart) V Delivery days depend on subsidiary. X P.45 R S45C P Actuator Rod S Electroless nickel plated 1. ore the holes for the counter and actuator rod to the dimensions shown in the figure B below, from the rear of the movable mold plate. 2. lot an opening for the display panel of the counter to the dimensions shown in the S figure below. 3. nsure that the actuator rod protrudes 4.0mm above the parting line and decide L E dimension depending on the mold plate thickness. S 4. crew the actuator rod into the plunger and insert the counter from the rear of the mold plate. 5.Retain the bottom of the counter with the support plate. MCVEX (External mount type) V Stock availability depends on subsidiary. X P.45 ■Mounting dimensions and method MCVPL (Parting line mount type) R Glass-filled nylon housing Maximum operating temperature 120℃ T V o be quoted on price & lead time above Max. Q'ty. Serial number ■Quantity discount rate X P.45 Part Number ① R Steel P Socket Head Cap Screws M425 (2 pieces) MCVR (Round type) KES KESS (Stainless steel) ① R Glass-filled nylon housing P Socket Head Cap Screws M425 (2 pieces) ID Plates for tool identification Maximum operating temperature 120℃ Serial number I V D Plate design is subject to change without prior notice. Mold Accessories KED KES KEG KEDS KESS KEGS JIS B13011996 V Tensile strength: 600N/mm2 or more ID Plates for tool identification Part Number MCVPL (Parting line mount type) only ① MCVEX (External mount type) ①② KED KEDS (Stainless steel) T V o be quoted on price & lead time above Max. Q'ty. V Delivery days depend on subsidiary. X P.45 MCVPL, MCVEX: CounterView™ Shot Counter is a registered trademark of Progressive Components International Corporation, covered by US Patent No.5,571,539, Canadian Patent No. 2,166,237, European Patent No. EP726129 and Others pending. MCVR: CounterView™ Shot Counter is a registered trademark of Progressive Components International Corporation, covered by US Patent No.5,571,539, Canadian Patent No. 2,166,237, European Patent No. EP726129, S.African Patent No. 2005/5337 and Asia and others pending.

Open the catalog to page 1