GUIDE FOR SWIVEL LIFTING EYE BOLTS
1Pages

{{requestButtons}}

Catalog excerpts

GUIDE FOR SWIVEL LIFTING EYE BOLTS - 1

GUIDE FOR SWIVEL LIFTING EYE BOLTS SWIVEL LIFTING EYE BOLTS V Non JIS material definition is listed on P.1359 - 1360 Socket head cap screw No. Item name R Q SCM435 2833HRC ① Shackle SCM435 2833HRC ② Turnnion Socket head cap 3239HRC SCM435 ③ Strength rank: 10.9 screw S45C 2428HRC ④ Spacer cap SUJ2 6062HRC ⑤ Steel ball SCM435 3945HRC ⑥ Button bolt Button bolt Round washer Hollow spacer ⑦ Round washer ⑧ Hollow spacer Mounting Examples Lifting from vertical direction A Type Vertical lifting B Type Side lifting S Coating painting Coating painting Black oxide film Trivalent Chromate Black oxide film Parkerizing Trivalent Chromate ③ R SCM435 Q 3239HRC S Black oxide film (Strength rank 10.9) Load Lifting from side direction Comparision on Indication maximum allowance Part Number U/Price of fastening load N {kgf} ③Socket torque for Mass k head cap Socket A: ertical B: ide V S (kg) screw side head cap lifting lifting Type M 119 screw Single Two bolts (N・m) bolt use use ■Guide for maintenance M ・ ake regular check-up on the change in shape and cracking according to the load working condition and operation frequency. V Note: Use at ordinary temperature below 40℃. ■Guide for lifting work A ・ s the shackle is designed for longitudinal load, do not directly hook larger bolt than inner diameter of the shackle. W ・ hen using two or more eye bolts, need attention on the loading displacement to single eye bolt depending on the lift angle. T ・ his item has rotating function for changing lifting direction, however, do NOT continuously rotate eye bolt in loading condition. S ・ udden lifting work is dangerous. Lift carefully with slow in lifting speed. (Impact shock may be a cause of bolt or other parts damage) ■Guide for installation S ・ it flange on the wider surface area than swivel lifting eye bolt and fasten bolts with right torque. V Note: Refer to right table on fastening torque indication. A ・ fter installing swivel lifting eye bolt, need to verify if the shackle moves at 360°against the lift shaft and 180°against the lifting direction. V For burning prevention, wipe off the screw part from the dirt and dust and install after lubrication if possible. Mold Accessories Spacer cap Steel ball Component Drawing ・Swivel Lifting Eye Bolt is available to rotate 360 against the heavy lift shaft. Also, available to rotate 180 against the lifting direction. ・Can safely use Swivel Lifting Eye Bolt even when the lifting work from side direction, beveled direction or under tensile condition which are dangerous with the conventional eye bolt of CHI. C ・ ompared with CHI, Swivel Lifting Eye Bolt has approx. three times allowance load with same bolt size. Available to use at small place by changing screw diameter M and outer dimension W smaller. V Refer to right table ° V Stock availability depends on subsidiary. X P.45 Strict prohibition U Do not hook in side load against the shackle U Make sure not to contact the lifting material and the shackle. A U bsolutely refrain from installing thick washer in between eye bolt flange and lifting material due to sharp decline in allowable lifting load. Delivery days depend on subsidiary. Non JIS material definition is listed on P.13591360.

Open the catalog to page 1

All Misumi America catalogs and technical brochures

  1. Stop Pins

    1 Pages

  2. Ball Splines

    1 Pages

  3. Lead Screws

    1 Pages

  4. Dritti

    1 Pages

Archived catalogs