• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Mirrorcle Technologies Hardware Guide - 29 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalogue excerpts

Mirrorcle Technologies, Inc. Hardware Guide Dr. Veljko Milanović Abhishek Kasturi Mirrorcle Technologies, Inc. February 2013 © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 1

Development Kits OEM Amplifiers OEM MEMS Controllers controllers with real-time and closed-loop control capability Please contact us for more information for FPGA based MEMS controllers, this category is not included in this document © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 2

Mirrorcle Development Kits - Contents 4 Three MEMS Mirror Devices USB MEMS Controller with High Voltage Amplifier customer-chosen device types and mirror sizes Includes all necessary cables and driver software 90° optical mount for the laser module on a ½”-diameter post 4.5” x 4.5” optical plate and two post holders 2-axis kinematic mount with MEMS MiniPCB on a ½”-diameter post Laser module and power supply with 2xAA batteries OPTIONAL add-on: Wide angle lens (with a ½”-diameter post on a post holder with a swivel base) Mirrorcle Software Suite installation CD © 2012 - 2013 Mirrorcle Technologies,...

 Open the catalogue to page 4

Development Kits – USB MEMS Controller Options 5 Development Kit based on National Instruments DAQ USB MEMS Controller (“USB-NI Option”) Development Kit based on Mirrorcle Serial USB MEMS Controller (“USB-SL Option”) © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 5

Development Kits – USB-NI Option 6 National Instruments X-series USB DAQ card (USB-6341) Embedded Mirrorcle high voltage amplifier with hardware filters for electrostatic MEMS driving 16 bit analog outputs for X and Y axis control (“AO0” and “AO1”) 8 bit digital output (“P0.0” to “P0.7”) with timing synchronized to analog output (when using Mirrorcle software and APIs) Powered by wall AC adapter, controlled by USB All features of the NI-DAQ card available to user (analog inputs, timers, digital IOs) Compatible with most PC platforms, LabView, etc. Can be used independently of Mirrorcle software...

 Open the catalogue to page 6

Development Kits – USB-SL Option 7 Mirrorcle MEMS Controller with an MCU and 1MB of RAM Embedded Mirrorcle high voltage amplifier with hardware filters for electrostatic MEMS driving 12 bit analog outputs for X and Y axis control (“AO0” and “AO1”) Powered by battery or USB, controlled by USB No analog inputs or general digital outputs Embedded laser driver with 32 current levels + laser bias current control. Output software controlled, synchronized with analog output. Compatible with Windows, supported only through Mirrorcle software and APIs © 2012 - 2013 Mirrorcle Technologies, Inc. All rights...

 Open the catalogue to page 7

Mirrorcle Development Kit, USB-NI Option 8 © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 8

Mirrorcle Development Kit, USB-SL Option 9 © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 9

Development Kits - Optical Hardware 10 Green laser module and batteries MiniPCB with ZIF socket on a kinematic mount Optional add-on wide-angle lens mounted on a post Example of assembled development kit optical hardware with LCC18 package and ZIF socket and a red laser module © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 10

Development Kits - MEMS Mirror Packages and Mounted MiniPCBs 11 Easiest and safest manual handling, insertion and extraction. Soft-tip tweezers based handling. Requires Insertion / Extraction Tool Soft-tip tweezers based handling. Requires Insertion / Extraction Tool © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 11

Development Kits - Mirrorcle Software Suite 12 The Mirrorcle Software suite comes with the Windows executables and development software Executables: MirrorcleLinearRaster – Windows Executable MirrorcleDraw – Windows Executable MTIDevice-Demo – Windows Executable (made from SDK example) LabView SDK (For USB-NI only) © 2012 - 2013 Mirrorcle Technologies, Inc. All rights reserved.

 Open the catalogue to page 12

Mirrorcle Software Suite - Executables 13 An executable software with a graphical user interface (GUI). It enables users to prepare content for driving MEMS mirror’s x-axis, y-axis, and a digital port (e.g. for laser modulation), and to run that content on applicable MEMS Controllers. Offsets, signal conditioning, filtering, voltage control, refresh rate control and other parameters are all available in the GUI. Content generation includes vector graphics modes, raster modes, function generating modes, quasi-static positioning mode (point-to-point movement), Lissajous pattern modes, ILDA file...

 Open the catalogue to page 13

Mirrorcle Software Suite – C++ SDK 14 C++ based Software Development Kit. This is the Software Development Kit (SDK) of the Mirrorcle Software Suite that allows users to develop their own applications. The SDK provides an interface to send arbitrary data vectors to MirrorcleTech MEMS mirror devices. C++ DLL: This interface provides a library with wrapper classes and functions for analog output to MTI-IO device, control of laser output, sample rate, filter settings, amplitude, etc. An example Visual C++ project is provided to illustrate the use of the library classes and several ways of driving...

 Open the catalogue to page 14

Mirrorcle Software Suite Matlab and Labview SDK 15 Matlab-based Software Development Kit. For NI-DAQ hardware this SDK is Matlab 2012 (or newer) compatible, and requires Data Acquisition Toolbox 3.2 or newer Similar to the C++ version, this is a Matlab-based software development kit (SDK) allowing the user the fastest and easiest route to development of micromirror applications. There are multiple examples of creating content, downloading the content, and running it on MEMS Controllers. For Mirrorcle hardware this SDK is Matlab 2009 (or newer) compatible LabView-based Software Development Kit...

 Open the catalogue to page 15

OEM High Voltage Amplifiers 17 4 unipolar high voltage outputs 0V - 150V Compatible for use with PCI NI-DAQ cards via 68-pin SCSI connector All control is possible via software through the NI-DAQ card Also capable of stand-alone use with 2 BNC inputs User provides 2 bi-polar analog signals for controlling X and Y axis External switch for high voltage DC/DC enable PicoAmp 4.x* with Digital Input and Hardware Filters 8 pin input for: SPI, High Voltage Enable, Filter Osc., VDD and GND User controls 4 channels (X+, X-, Y-, Y+) via SPI commands to 16-bit DAC 4 unipolar high voltage outputs 0V – 140V User...

 Open the catalogue to page 17

All Mirrorcle Technologies catalogues and technical brochures

  1. LCC20

    1 Pages

    En
  2. LCC18

    2 Pages

    En
  3. DIP24-038

    2 Pages

    En
  4. DIP24-031

    1 Pages

    En
  5. DIP24-025

    2 Pages

    En