Standard models Specification options
IntroductionDesignGuide One second scan rate.6" (150 mm) leadwires.
LED
power indicator.Calibration: Setpoint factory-calibrated to specified resistance. CT19 8 -1019 Model number CT198 = Heaterstat (nominal setpoint)CT698 = Heaterstat matched to heater R Setpoint calibration code R = Nominal heater resistance (CT198)T = Heaterstat/heater matched set (CT698) ModelNumber Setpoint range ( Ω ) Supply voltage (VDC) MinimumMaximum 365 Initial calibration setpoint Setpoint calibration code = R:Nominal heater resistance at set point temperature (in ohms).* Must be within allowable range for specified model.Setpoint calibration code = T:Temperature setpoint. Specify temperature and scale (°C or °F)
Ex: 120F represents 120°F MinimumMaximum
P olyimideHeatersSiliconeRubberHeaters (foil)Standard CT198-1000 4.50 6.75 4.75 10 CT198-1001 5.63 8.44 7.5 16 CT198-1002 7.03 10.55 7.5 21 CT198-1003 8.79 13.18 7.5 26 CT198-1004 10.99 16.48 7.5 33 CT198-1005 13.73 20.60 7.5 41 L Leads CT198-1006 17.17 25.75 7.5 60 L = Leadwires (standard)P = Pins (LED not available) CT198-1007 21.46 32.19 7.5 60 CT198-1008 26.82 40.23 7.5 60 1 Scan rate
P olyimide& RubberRubberHeaters(wire-wound)Mica HeatersThermal-ClearHeatersAll- CT198-1009 33.53 50.29 7.5 60 0.1 to 10 seconds (1 second standard) CT198-1010 41.91 62.86 7.5 60 CT19 8 -1019R365L1 = Sample part number CT198-1011 52.39 78.58 7.5 60 CT198-1012 65.48 98.23 7.5 60 CT198-1013 81.85 122.78 7.5 60 * To determine heater resistance at temperature T, go to www.minco.com/ct19 CT198-1014 102.32 153.48 7.5 60 8 .htmlResistance vs. temperature tables are available at:www.minco.com/sensorcalc/ CT198-1015 127.90 191.85 7.5 60 CT198-1016 159.87 239.81 7.5 60 CT198-1017 199.84 299.76 7.5 60 CT198-1018 249.80 374.70 7.5 60 CT198-1019 312.25 468.38 7.5 60 CT198-1020 390.31 585.47 7.5 60 CT198-1021 487.89 731.84 9 60 CT198-1022 609.86 914.80 11 60
1 Red2 V + T CRHeater DC P owerSupp Heaterstat
l y OrangeHigh P olyimideHeatersSensors,Controllers &AccessoriesReference GroundOut B l ack3 Wiring di a gr a m
Dimen 1 .50 (3 8 . 1 ) 8 5(9. (5. 1 )0.675( 8 )0. 1 .275 (32. 4 ) 4 5 ( 1 . 1 ) ∅ [3]0. 1 7. 1 )0.0 1 9 4 4 0( ( 4 .9) ∅ 1 .00(25. 1 0.2)0. 0. 1 60( 4 )0.25(6. 4 . 1 ) ∅ 4 )0.3 1 0(2.5) 0.50( 1 2.7) 0. 14 9 (3. 8 ) ∅ P INS: 0.025 (0.6) SQUARE0.20 P C BO AR DL SE TP OIN T ADJUS T AY OU T s ion s in inche s (mm) Specifications subject to change 4 6
|
763.57 1 .3 1 2 1 | Europe: (33) 5 6 1 03 2 4 1 | Asia P aci c: (65) 65 11 33 88 Sa l es and SupportAmericas: