| Typical applications • Maintain warmth of satellite components • Protect aircraft electronic and mechanical devices against cold at high altitudes • Stabilize optoelectronic components • Test or simulate integrated circuits • Enable cold weather operation of outdoor electronics such as card readers, LCDs or ruggedized laptops • Maintain constant temperature in analytic test equipment Custom options • Custom shapes and sizes: Polyimide / FEP - 22" x 42" (560 x 1065 mm) Polyimide / WA/ULA - 22" x 72" (560 x 1825 mm) • Custom resistance: Polyimide / FEP - 450 fi/in2 (70 fi/cm2) Polyimide / WA/ULA - 1500 ifiW (233 fi/crr|2) • WA or ULA internal adhesive is more economical than FEP for most custom designs that operate below 150°C • Available with surface mount sensors, connectors, heat sinks and even integral controllers • NASA approval is available in nearly all of the standard size Polyimide heaters • TÜV or UL recognition marking is optional • Tighter resistance tolerance • RoHS compliance • Contact Access: Minco Sales and Support for design assistance Specifications subject to change |