CF2 series
2Pages

The CF2 Series flat bed cutting plotter capable of cutting various kinds of media with high accuracy without dies. Out of a total of 30 kinds of line-up, you can choose the one best suited for your needs. By cutting the printed media, you may produce high value-added products on demand required. Begin multi-type small-lot production with unprecedented high quality. Optional supply items/Standard accessories CF2 series specifications CF2-0912 Effective Swivel Blade for small letters 4 axes DC software servo Swivel Blade for rubber sheet Swivel Blade for reflevting sheet Swivel Blade for fluorescent sheet SPB-0007 Maximum acceleration Mechanical resolution Thick material can be outline-cut with high accuracy. Mark-sensor function Distance accuracy With the adoption of a high performance color photo sensor, the square register marks printed on the media are detected and the position of the origin, inclination of coordinate and distance are adjusted. This enables the operator to perform cutting at the precise position. Further, the sensor recognizes the difference of "color of media" and "color of square register marks", and enables the cutter to perform cuts accurately, while being tailored to the printed material without being influenced square sensor by the color of the media. A light pointer register light pointer that is used as marker when setting the mark media is provided as standard device and facilitates position adjustment with square register marks. Maximum thickness of set work Work fixation Dimension Width Height Weight Power requirement Main Unit Power consumption Media is set easily and accurately. Extensive line-up of cutter blades. 300 VA Blower Stated separately Stated separately Main Unit For works of which thickness is 10 mm or less Carbide design blade 30 ° Carbide both blades Titanium coated both blades For works of which thickness is 7 mm or less Operation environment High-speed steel blade 30°7 mm Receiver buffer size Titanium coated blade 45 ° Origin repetition accuracy By adjusting the depth of the cutter blade, you can half-cut composite, laminated material (etc). As two tools can be used, you can perform different types of half-cutting or die-cutting without changing the tools. High-speed steel blade 45 ° Repetition accuracy For works of which thickness is 2 mm or less changeable from operation panel) For works of which thickness is 5 mm or less High-speed steel blade 30 ° Command resolution Flatbed Cutting Plotter Swivel cutter holder Swivel Blade for vinyl sheet Sensor model Maximum plotting speed Composite materials etc. can be half-cut. plotting area For corrugated fiberboard in general Corrugated fiberboard E to B flute * Vacuum unit 120 V, 0.51 / 0.7 kw, filter separately available Vacuum unit 220 V, 0.51 / 0.7 kw, filter separately available Vinyl chloride for clear package* Vacuum unit 240 V, 0.51/ 0.7 kw, filter separately available Plastic corrugated fiberboard Vacuum unit 120 V, 0.51 kw, filter separately available Vinyl chloride sheet for signboard Vacuum unit 220 V, 0.25 / 0.38 kw, filter separately available Soft vinyl chloride 0.5 to 10 mm Vacuum unit 240 V, 0.25 / 0.38 kw, filter separately available Reflecting sheet For tangential cutter. Dial type Sand-blast rubber For swivel cutter. Dial type Industrial sheet rubber 3 mm or less Materials that can be processed T Cutter blades in the marketplace can also be used. As the low cost cutter blades can be used, the running cost can be reduced. *For models with sensor, work-guide plate is used instead of work-guide pin. *Please note that the work guide is used just as a guide for setting the media and it is not intended to guarantee the distance to the origin. Coated board for packaging* 1: Effective range of cutting 2: Media 3: Work-guide plate 4: Origin seal 5: Work-guide pin A wide variety of cutter blades tailored to various media are provided. As one machine can process with flexibility, expand your business opportunities. Corrugated fiberboard AB flute * model without sensor With the aid of a work-guide installed to the directions of X and Y, the positioning of the media is smooth and working efficiency has been improved. It is also possible to remove the work-guide depending on the media size. *1 Accuracy written with a pen where the load is almost non-existent. Guaranteed temperature range is 20 to 25 °C. *2 A command based on HP-GL. Industrial sheet rubber 0.5 to 10 mm Full of useful functions to support cutting Pattern Happort Correction of starting and ending points The starting and ending positions of cutting are corrected, which makes cut-away of the media smoother. Adjustable within the range of 0 to 2.5 mm. cut data press correction Pressure of tool coming down is corrected to ensure complete cutting. back cutting Declination of starting point and ending point of a circle cutting caused by thickness or hardness of the media is corrected and cutting nearly perfect circle is available. Back cutting is also possible by attaching mark chips to the back surface. From the front surface, excess cut is not seen making the finish beautiful. Provided with felt mat required when reciprocating cutter is used. Various holders are available to meet a variety of materials. Repeated cutting Is capable of repeating the cutting up to maximum of 5 times changing the cutting pressure. With only one time of data sending, you can cut even thick material with high quality finish. Resin belt. 5.0 mm or less Various foam 20 mm or less Note As the property of the media may vary depending on the material manufacturers, the above data is just a guide. Make sure to perform your own testing. Note * shows material to which drawing of the ruled line is possible. Size variation We are prepared to make special equipment meeting your special application requirements. Please consult with our sales. Multiple registration of cutting conditions Cutting conditions such as pressure, speed, correction of starting and ending points, circle correction, offsets, etc. by tool may be registered for multiple times. Provided with a blower to hold down materials. *Please install this unit confirming that there is a space of 1,000 mm or more around the unit. All trademarks or registered trademarks are the property of their respective owners. * Provided with CF2-RC/RT as standard items. * Enhanced blower is also available as option. 2182-3 Shigeno-otsu, Tomi-city, Nagano 389-0512, Japan Tel: +81-268-78-2288 trading@mimaki.jp www.mimaki.co.jp Specifications are subject to change without notice. Some of the screens and printing samples in this catalog are artificial renderings. 150 Satellite Boulevard, suite A, Suwanee, Georgia 30024, U.S.A Atlanta +1-888-530-3988 Boston +1-888-530-3986 Los Angeles +1-888-530-3987 Chicago +1-888-530-3985 www.mimakiusa.com Stammerdijk 7E, 1112 AA Diemen, The Netherlands Tel: +31-20-4627-640 www.mimakieurope.com Perform high accuracy cuts on a wide range of materials.