Group: Ingersoll Rand
Catalog excerpts
MILROYAL D PUMPS GENERAL SPECIFICATIONS MILROYAL D WITH HPD LIQUID END Drive Polar Crank Design—All moving parts submerged in oil Liquid Ends Available High Performance Diaphragm (HPD) or Packed Plunger Multiplexing Up to 6 pumps driven by one motor standard. Consult Applications Engineering concerning capabilities for specific applications. Maximum Performance Ratings (per head) 53 GPH @ 70 PSIG (200 L/H @ 5 Bar) to 0.5 GPH @ 3000 PSIG (1.9 L/H @ 207 Bar) Capacity Control Manual Micrometer standard Electronic stroke length control or variable speed optional Accuracy—Steady State ±1.0% over 10:1 turndown ratio Weight with Motor (simplex; approximate) HPD = 195 lbs. (88 kg); Packed Plunger = 95 lbs. (43 kg) TYPICAL PERFORMANCE (See note 1) Packed Plunger Plgr. Dia. High Performance Diaphragm Max. Capacity ml/H NOTES: 1. Typical performance based on 1725 RPM, 60 hz motor. Derate flow rates for all other RPM speeds. 2. Plastic liquid ends are limited to 150 PSIG (10 Bar) @68°F (20°C) and are linearly derated to 65 PSIG (4 Bar) @ 140 °F (60°C).
Open the catalog to page 1PACKED PLUNGER MODEL CODE End Item Model Code Option Select Number M D P Plunger Dia. 02 = 1/8"* H2 = 1/8"Hi Press* 04 = 1/4"* H4 = 1/4"Hi Press* 07 = 7/16"‡ 10 = 5/8"‡ Liquid End Material 1 = 316 SS 2 = Plastic 5 = Alloy 20 Motor Mount Flange Mount CB = Nema 56C Metric Mount, B5 Flange MC = IEC 71 Other Mounts MM = Multiplexed Packing Lube† GF = Grease Fitting TF = Through Flush NN = None Capacity Adjustment Manual M4 = Micrometer (aluminum) Electronic, 4-20 mA Input E1 = Nema 4, 115 V E2 = Nema 4, 230 V EA = Exp. Proof, 115V EB = Exp. Proof, 230V Connections = NPT = ANSI 150 lb. 1/2”...
Open the catalog to page 2MATERIALS OF CONSTRUCTION Packed Plunger Liquid End Material of Constr uction Plastic Alloy 20 316 S S Ball Checks Ball Seats Ceramic Colmonoy Colmonoy Car tridge Body PVC Alloy 20 316 S S Packing PTFE PTFE PTFE NOTES: ‡ Ball checks in high pressure liquid end are sapphire. High Performance Diaphragm (HPD) Material of Constr uction Diaphragm Head 316 S S CF-8M * 20CB-3 CN-7M† PVC Alloy C22 CX2MW ‡ NOTES: * CF-8M is the cast equivalent to wrought 316 SS. † CN-7M is the cast equivalent to wrought 20CB-3. ‡ CX2MW is the cast equivalent to wrought Alloy C22. DRIVE DIMENSIONS Side View NOTE:...
Open the catalog to page 3PACKED PLUNGER LIQUID END DIMENSIONS Discharge connection Suction connection through flush connection (male) HIGH PERFORMANCE DIAPHRAGM (HPD) LIQUID END DIMENSIONS Suction connection Suction connection
Open the catalog to page 4All Milton Roy catalogs and technical brochures
-
Proteus
8 Pages
-
POWEROYAL®
8 Pages
-
Primeroyal
8 Pages
-
mROY
7 Pages
-
mRoy 3300 Brochure
16 Pages
-
Primeroyal X brochure
4 Pages
-
SOLAROY Brochure
4 Pages
-
Streaming Current Detectors
4 Pages
-
MaxRoy B Pumps
2 Pages
-
SC5200
2 Pages
-
Milroyal C
12 Pages
-
Milroyal B
12 Pages
-
Electronic Capacity Control
4 Pages
-
Milroyal G Metering Pumps
2 Pages
-
Milroyal D Pumps
4 Pages
-
Calibration Column
2 Pages
-
RoyPak
2 Pages
-
PrimeRoyal Brochure
8 Pages
Archived catalogs
-
339-0047-000 8/00 mRoy A and B
72 Pages
-
Milton Roy mRoy Brochure #3300
12 Pages