Text version of the page

IMPORTANT SAFETY INSTRUCTIONS WARNING

WHEN INSTALLING, CALIBRATING, OR OPERATING THIS ACTUATOR, BASICSAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS INJURY.Read all instructions before installation, calibration, or operationGENERAL SAFETY CONSIDERATIONS - Read this manual carefully. - Installation, calibration, and maintenance should be performed by trained and qualified personnel. Per-sonnel should be familiar with the precautions required in working with hazardous voltages which existinside the actuator. Personnel should also be adequately trained on any hazards inherent in the chem-icals used in the metering pump.- Always wear protective clothing including gloves and safety glasses when working on or near chemicalmetering pumps.- Follow directions and warnings provided with the chemicals from the chemical manufacturer. User isresponsible for determining the hazards associated with the chemicals being pumped and using the proper safety gear and procedures.- Hazardous voltages are present when cover is removed. Disconnect power when installing or servicingthis unit.- Unit must be properly grounded. - Conform to local codes in wiring this equipment.- Actuator must be adequately rated if it is to be used in a hazardous location. See product data plate forrating information. This rating must not be exceeded under any circumstances. To prevent ignition ofhazardous atmospheres, cover must be tight while circuits are energized.- In order to comply with the requirements of agency approvals (see data plate), specifications for con-duit connections, wire gauge and type, fastener torque ratings, and operating conditions must beadhered to. i