- Catalogs
- Millrock Technology, Inc
- MD SERIES Console Manifold Freeze Dryer
MD SERIES Console Manifold Freeze Dryer
MD SERIES Console Manifold Freeze Dryer
The MD Series Console Manifold Freeze Dryer by Millrock Technology is designed to meet the demand for a cost-effective, high-performance freeze dryer. It features advanced microprocessor controls and offers a condensing rate of 20L per 24 hours with a 30L capacity. The unit is suitable for both water-based samples and those containing solvents, with condenser options of –53°C and –85°C respectively.
- Shelf pull down from +20°C to –40°C in under 30 minutes.
- Vacuum pull down to 100 mT in less than 20 minutes.
- Vacuum leak rate is less than 30 mT per hour.
- Achieves a vacuum level of 10 mT in a clean, dry system at -85°C.
- Laboratory Research
- Proteins
- Organic Tissues
- Waste Products
- Plant Material
- Polymers
- Advanced microprocessor controls with a backlit matrix LCD display.
- Manifold dryer available with 24 or 48 ports.
- 316L construction on all wetted parts for durability.
- Hot gas defrost for quick defrosting.
- CFC-free refrigeration system.
- 200 LPM corrosion-resistant vacuum pump.
- Auto Start-up and 'Ready' Indication.
- Power Failure Recovery.
- Alarms for low voltage, high ambient temperature, power outage, and maintenance reminders.
- Available in single-tier 24 port and 48 port 2-tiered configurations.
- Straight-thru vacuum valves for less flow restriction and faster drying.
- Stainlessware FREEZEDRYWARE™ for bulk drying and vial drying.
- Glass adapters for easy connections, available in various sizes and angles.
- Flaskware ranging from 75 ml to 1200 ml with silicone tops.
Specifications are subject to change without notice, based on 20°C ambient on 60Hz.
Catalog excerpts
Millrock has responded to customer demand for a cost effective high performance manifold freeze dryer. THE MD SERIES takes a market proven design and has added the most advanced microprocessor control available on a manifold unit. THE MD SERIES Freeze-Dryer boasts a 20L per 24 hour condensing rate with a 30L capacity. For water based samples, the –53 C condenser is the perfect choice. For samples containing solvents or with low eutectic points, the –85 C condenser provides maximum performance. For labs that need quick turn-around, hot gas defrost supplies fast/automatic defrosting. Choose from a 24 and 48 port manifold. All provide ample space for small and large samples to be dried simultaneously. Straight-thru vacuum valves offer a more direct vapor path. SYSTEM PERFORMANCE • Shelf pull down from +20 to –40C in less than 30 minutes • Vacuum pull down to 100 mT in less than 20 minutes • Vacuum leak rate less than 30 mT per hour • Vacuum level 10 mT in clean dry system (-85C) MD SERIES Console Manifold Freeze Dryer CONTROL SYSTEM • Advanced microprocessor controls • Manifold • Manifold dryer with 24 or 48 Ports • Laboratory Research • Proteins • Organic Tissues • Waste Products • Plant Material • Polymers CONDENSER • 316L construction on all wetted parts • 20 liters in 24 hours, 30L capacity • Exposed coil condenser for maximum efficiency • Hot gas defrost REFRIGERATION • CFC-free refrigeration • Hot gas defrost VACUUM • 200LPM corrosion resistant vacuum pump
Open the catalog to page 1
MICROPROCESSOR INSTRUMENTATION Millrock has taken bench-top freeze-drying to a new level with the new 3Gen control system. Millrock’s team first developed features like the ‘ready’ indicator and auto power-outage recovery, and we now bring you ‘3rd Generation’ controls with a display that is easy to read and intuitive. VACUUM DISPLAY A single tier 24 port manifold and a 48 port 2-tiered manifold are offered with the MD SERIES and come complete with vacuum valves. Each port is ½" external diameter and are mounted on 3" spacing. The ports are spaced to provide room for the largest flasks. CONTROL...
Open the catalog to page 2
