video corpo

Syncrowave 210 Series
4Pages

{{requestButtons}}

Catalog excerpts

Syncrowave 210 Series - 1

Issued June 2014 • Index No. AD/4.6 Light Industrial Applications Quick Specs Light Metal Fabrication Maintenance/Repair Operations Light Manufacturing Automotive Repair Vocational Training Hobbyist AC/DC TIG (GTAW) DC Stick (SMAW) Pulsed TIG (GTAW-P) MIG (GMAW) Flux-Cored (FCAW) TIG/Stick/MIG Welding Power Source Input Power 120 – 240 V, 1-Phase Amperage Range 5 – 210 A Rated Output 125 A at 15 V, 60% Duty Cycle Net Weight Runner package: 133.5 lb. (61 kg) Runner TIG/MIG Complete package: 139.5 lb. (63 kg) Comes complete with: Power source with 10-ft. (3 m) primary cord and MVP™ plugs for 120 V and 240 V Weldcraft® A-150 (WP-17) 12.5-ft. (3.8 m) TIG torch with Dinse connector RFCS-14 foot control with 20-ft. (6 m) cord (#043 554) Electrode holder with Dinse connector Work clamp with 12-ft. (3.7 m) cable and Dinse connector Flow gauge regulator and hose Factory-installed running gear with EZ-Change™ Low Cylinder Rack Easy to use. 1. Turn power on. 2. Select Process: AC TIG, DC TIG, DC Stick or MIG Spool Gun. 3. Set amperage or voltage based on material thickness. Then weld! It’s easy as 1,2,3. Pro-Set™ (TIG) eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. Simply select the feature and adjust until Pro-Set appears on the display. MIG Complete package adds: Spoolmate™ 100 Series spool gun (#300 371) 4-14 pin connector Flow-thru Dinse connector Memory card AC balance (TIG) control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. Multi-Voltage Plug (MVP™) allows for connection to 120 or 240-volt receptacles without tools by choosing the plug that fits the receptacle and connecting it to the power cord. Pulse (TIG). Pulsing can increase puddle agitation, arc stability and travel speeds while reducing heat input and distortion. Expandable feature. Auto-Set ™ (MIG) automatically sets your welder to the proper parameters. Simply set the wire size, material thickness, and shielding gas, and you’re ready to weld. DIG (Stick) control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010. Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. Allows for any input voltage hookup (120 – 240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Upgradeable and expandable. Front panel memory card data port provides the ability to easily upgrade software and expand product features. Visit MillerWelds.com/TIGSoftware for the latest software upgrades and expansions. Low power draw. Inverter-based power source provides full welding output from 240 volts while drawing less than 30 amps. Power source is warranted for 3 years, parts and labor. Original main power rectifier parts are warranted for 5 years. Equipment Sales US and Canada An ITW Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1
Syncrowave 210 Series - 2

Specifications (Subject to change without notice.) Input Power Welding Process Welding Amperage Range Amps Input at Rated Output Runner package: 133.5 lb. (61 kg) Runner TIG/MIG Complete package: 139.5 lb. (63 kg) *While idling. IP23S rating — This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered. Operating temperature range is 14 to 104° F (-10 to 40° C). Storage temperature range is -22 to 149° F (-30 to 65° C). Portions of the preceding text are contained in EN 60974-10: “Electromagnetic Compatibility...

Open the catalog to page 2
Syncrowave 210 Series - 3

Additional Features EZ-Change™ Low Cylinder Rack Operators no longer need to lift cylinders. Cylinders now easily roll on and off our EZ-Change™ Low Cylinder Rack. Dual Front Handles Split handle with rubber grips designed to move machine easily and provide quick accessibility to work lead and TIG torch. Handles provide protection for front panel. Integrated Storage Compartment and Parameter Chart Convenient compartment allows for easy storage of cables, foot controls and power cord adapters in the machine. EZ-Access™ Consumable Compartment Convenient flip-down compartment contains storage...

Open the catalog to page 3
Syncrowave 210 Series - 4

Genuine Miller Accessories (Continued) ® Remote Controls Wireless Remote Foot Control #300 429 For remote current and contactor control. Receiver plugs directly into the 14-pin receptacle of Miller machine. 90-foot (27.4 m) operating range. RFCS-14 HD Foot Control #194 744 Maximum flexibility is accomplished with a reconfigurable cord that can exit the front, back or either side of the pedal. Foot pedal provides remote current and contactor control. Includes 20-foot (6 m) cord and 14-pin plug. RCC-14 Remote Contactor and Current Control #151 086 14-pin plug Side-to-side (east/west)...

Open the catalog to page 4

All Miller Electric Mfg. catalogs and technical brochures

  1. TS130

    4 Pages

  2. ED160

    8 Pages

  3. DC296

    4 Pages

  4. AV565

    2 Pages

  5. AY155

    4 Pages

  6. AD73

    12 Pages

  7. EnPak® A60

    8 Pages

  8. SYNCROWAVE

    8 Pages

  9. Fusion160

    4 Pages

  10. LMSW-52 220

    2 Pages

  11. Coolbelt

    2 Pages

  12. Trailblazer

    2 Pages

  13. Live arc

    4 Pages

  14. CP-302

    4 Pages

  15. S-32SL

    4 Pages

  16. Wildcat? 200

    4 Pages

  17. CST? 280

    4 Pages

  18. 70 Series

    8 Pages

  19. R-115

    4 Pages

  20. 22A and 24A

    4 Pages

  21. DC19-8

    8 Pages

  22. AY17-0

    4 Pages

Archived catalogs