video corpo

SSW Series Spot Welders
4Pages

{{requestButtons}}

Catalog excerpts

SSW Series Spot Welders - 1

SSW Series Spot Welders Applications Quick Specs Sheet Metal Work Light Fabrication Maintenance Work Water-Cooled Resistance Spot Welders Resistance Spot Welding Rated Output Work Capacity 20 kVA units weld total thicknesses up to 1/4 inch (6.3 mm). Not recommended for aluminum or copper alloys. 20 kVA at 40% duty cycle depending on model, based on 10-second time period SSW foot switch permits user to use both hands to position weldment between tongs. Can be held longer if longer hold time is desired. SSW models are designed for stationary use and come with an all-steel pedestal which houses timers and controls. SSW models come complete with: Stationary welding head Remote foot switch Pedestal inclusive of controls and timer Air filter/regulator assembly All spot welders operate on single-phase input power, and require a minimum air supply of 60 PSI (414 kPa). Adjustable tong pressure nuts to adjust tong pressure for different thicknesses and applications. Note: Order tongs/tips separately to match your applications Power switch/power “on” light/circuit breaker protects control circuitry. Easy reset. Air filter/regulator assembly included. Cam-operated locking device simplifies installation and adjustment of bottom tong. Set-up/weld switch permits checking of tong pressure and alignment without making a weld. Ten-step current control adjusts output current with no change in duty cycle. Built-in squeeze/weld timer makes it quick and easy to set or adjust squeeze and/or weld time in hundredths of a second. LED display makes it easy to read and see timer settings. (Subject to change without notice.) Stationary Model Work Capacity* Rated Output** Rated Output (Calibrated w/ standard-type tongs) 6 in. (152 mm) 12 in. (305 mm) 18 in. (457 mm) *Combined thickness uncoated mild steel using 6-inch (152 mm) tongs. **Duty cycle based on 10-second time period. (40% duty cycle means unit can weld for 4 seconds out of each 10-second time period.) Equipment Sales US and Canada An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1
SSW Series Spot Welders - 2

Control Panel LED Display 1 First row of LEDs displays actual times. Second row of LEDs displays squeeze time set or weld time set. 4 1. Power “On” Light/Circuit Breaker/Switch 2. Fuse to Protect Control Transformer 3. Weld Amperage Control 4. LED Display 5. Setup/Weld Switch Place rocker switch in Setup position to check tong pressure and alignment without making weld. Place in Weld position when ready to activate actual squeeze and weld time. Sets times from 9.99 to 0.01 seconds. WT Selector Button Set weld time with buttons (3), (2), (1). ST Selector Button Set squeeze time with buttons...

Open the catalog to page 2
SSW Series Spot Welders - 3

Tongs and Tips (Must be ordered separately from spot welders. One pair of tips are supplied with each set of tongs.) Tong Length 6 in. 12 in. 18 in. (150 mm) (304 mm) (457 mm) Notes for tongs and tips: Tips Included No. 1 Morse Taper No. 2 Morse Taper Tongs and tips shown to the left can be used with all PSW and SSW model spot welders. Recommended maximum tong length is 18 inches (457 mm). Tong throat-height dimension for standard 90° and 45° tongs is 4-1/4 inches (108 mm). Throat length is measured from the center of the spot tips to the front water hose connection. X = tong length. One...

Open the catalog to page 3
SSW Series Spot Welders - 4

Typical Installations Stationary Resistance Spot Welding Basic Equipment Coolant line Coolmate circulator Order tongs and tips separately. Also required: Input power cord of proper size per NEC and local codes. Coolant source and two coolant hoses (5/16 ID). Hoses must be compatible with coolant. Note: Oxy-acetylene hoses are not compatible with ethylene glycol. Air hoses. Slip-on hoses tighten with hose clamps Normally 5/8-18 left-hand threaded receptacles Coolant line Air hose 60 – 100 PSI Air in Input power line Air filter/regulator assembly Foot switch Ordering Information Equipment and...

Open the catalog to page 4

All Miller Electric Mfg. catalogs and technical brochures

  1. TS130

    4 Pages

  2. ED160

    8 Pages

  3. DC296

    4 Pages

  4. AV565

    2 Pages

  5. AY155

    4 Pages

  6. AD73

    12 Pages

  7. EnPak® A60

    8 Pages

  8. SYNCROWAVE

    8 Pages

  9. Fusion160

    4 Pages

  10. LMSW-52 220

    2 Pages

  11. Coolbelt

    2 Pages

  12. Trailblazer

    2 Pages

  13. Live arc

    4 Pages

  14. CP-302

    4 Pages

  15. S-32SL

    4 Pages

  16. Wildcat? 200

    4 Pages

  17. CST? 280

    4 Pages

  18. 70 Series

    8 Pages

  19. R-115

    4 Pages

  20. 22A and 24A

    4 Pages

  21. DC19-8

    8 Pages

  22. AY17-0

    4 Pages

Archived catalogs