Catalogs >
Miller Electric Mfg. >
Spectrum® 875 Auto-Line

Spectrum® 875 Auto-Line
4Pages

Catalog excerpts

Industrial Applications Quick Specs Construction Maintenance/Repair Fabrication Process Air Plasma Cutting and Gouging Air Plasma Cutting and Gouging Rated Input Cutting Capability System Weight 875/875 Auto-Line: 1-Phase: 60 A at 140 VDC, 208 V: 40% Duty Cycle, 230 V: 50% Duty Cycle 875 Auto-Line: 3-Phase: 60 A at 140 VDC, 208 V: 40% Duty Cycle 230 – 380 V: 50% Duty Cycle 380 – 575 V: 60% Duty Cycle 875: With 20-ft. torch: 51 lb. (23.1 kg) With 50-ft. torch: 62 lb. (28.1 kg) 875 Auto-Line with hand-held torch: With 20-ft. torch: 56 lb. (25.5 kg) With 50-ft. torch: 67 lb. (30.5 kg) 875 Auto-Line with machine-held torch: With 25-ft. torch: 59 lb. (27 kg) With 50-ft. torch: 68 lb. (30.8 kg) See page 2 for 100% Duty Cycle ratings Required Input Pressure/Flow 6.75 SCFM (191 L/min.) at 90 PSI MIN (621 kPa) 120 PSI MAX (828 kPa) Comes Complete With: ICE-60T hand-held torch with 20-ft. (6 m) or 50-ft. (15.2 m) cable; or ICE-60TM machine-held torch kit (Auto-Line model only, see page 3 for more information) with 25-ft. (7.6 m) or 50-ft. (15.2 m) cable Heavy-duty work clamp with 20-ft. (6 m) or 50-ft. (15.2 m) cable 10-ft. (3 m) power cord Extra consumables 875 Auto-Line™ unit automatically connects to any primary input voltage from 208 – 575 volts single- or three-phase, 50 or 60 Hz. LVC™ line voltage compensation provides peak performance power under variable conditions (power fluctuations up to ±15 percent) for steady cuts and cleaner ending cuts. Consumables storage compartment provides convenient access to consumables and parts. Auto-Refire™ technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal — all automatically! No need for manual re-triggering which reduces user hand fatigue. Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components. Fan-On-Demand™ cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit. Starts without high-frequency so it will not interfere with or damage controls or computers. Auto postflow calculates the length of postflow time based on the amount of cutting time to optimize consumable life and eliminate excessive air usage. Ultra-Quick Connect™ torch and work cable offer the fastest plasma torch and work cable connection and removal in the industry. Can be powered by any Miller engine drive with generator power at or above 11 kW (e.g. Bobcat™), or by equivalent competitive equipment. See page 2 for engine drive compatibility and recommended settings. ICE-60T/TM torch offers improved plasma flow characteristics for increased cutting speeds and longer consumable set life. Automatic air regulation. For end user convenience, the unit has no pressure gauge or manual regulator knob. The unit automatically adjusts the air pressure to the torch for optimum cutting and gouging. No adjustments necessary. Automation kits and accessories are available. See page 3 for more information. Power source is warranted for 3 years, parts and labor. ICE torch is warranted for 1 year, parts and labor. Equipment Sales US and Canada An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1

Non-Auto-Line model is 1-Phase only. (Subject to change without notice.) Amps Input at Rated Output, 50/60 Hz 1-Phase: 60 A at 140 VDC, 208 V: 40% duty cycle 230 V: 50% duty cycle 1-Phase: 60 A at 140 VDC, 208: 40% duty cycle 230 V: 50% duty cycle 230 V: 100% duty cycle at 50 A 3-Phase: 60 A at 140 VDC, 208 V: 40% duty cycle 230 – 380 V: 50% duty cycle 380 – 575 V: 60% duty cycle 380 – 575 V: 100% duty cycle at 50 A *Add 8.5 lb. (3.9 kg) for shipping weight. **Add 11.5 lb. (5.2 kg) for shipping weight. With Hand-Held Torch* 20 ft. (6.1 m): 51 lb. (23.1 kg) 50 ft. (15.2 m): 62 lb. (28.1 kg)...

Open the catalog to page 2

Genuine Miller Accessories ® No. 30B Economy Running Gear and Cord Wrap #300 511 Economical running gear with angle for easy front panel access provides storage for gloves and tools. Protective Cover #300 388 Mildew-resistant, odor-free, waterproof cover protects your machine’s finish. Cable management pouches provide storage for 20-foot (6.1 m) torch and work cables. Female Receptacle Miller Service Parts Accessories The following accessories must be ordered from Miller Service Parts. RTI Replacement Filter Element #212 771 For kit #300 491. ICE-60T Consumable Kit #239 086 Consumable kit...

Open the catalog to page 3

Replacement Torches and Consumables Standard Cutting Machine Cutting Extended Cutting Apply silicone grease (#169 231) before installing. Extended 40 A Tip #212 729 Gouge Shield #212 731 Gouging Cup Installation: Do not overtighten — finger-tight only. Ordering Information Power Source Spectrum® 875 #907 390-01-1 With 20-ft. (6.1 m) ICE-60T hand-held torch 208 /230 V, 1-phase #907 390-01-2 With 50-ft. (15.2 m) ICE-60T hand-held torch Spectrum® 875 Auto-Line™ #907 396 With 20-ft. (6.1 m) ICE-60T hand-held torch 208 – 575 V, 1- or 3-phase #907 396-00-1 With 50-ft. (15.2 m) ICE-60T hand-held...

Open the catalog to page 4