Catalogs >
Miller Electric Mfg. >
Multimatic 200

Multimatic 200
4Pages

Catalog excerpts

Multimatic 200 ™ Issued April 2012 • Index No. DC/12.57 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Light Industrial Applications Quick Specs Processes Weld Thickness Light Fabrication Maintenance and Repair Mechanical Contractor Construction MIG (GMAW) Flux-Cored (FCAW) DC TIG (GTAW) DC Stick (SMAW) MIG welds 24 ga.– 3/8 in. mild steel and 18 ga.– 1/4 in. aluminum. TIG welds .020 – 3/16 in. mild steel Input Power 120 V, 20 A, 50/60 Hz, single phase 230 V, 18 A, 50/60 Hz, single phase Weight 29 lb. (13.2 kg) The Power of Blue . ® Comes complete with: Power source Power cord and MVP plugs for 120 and 230 V 10-ft. (3 m) Bernard® Q150 MIG gun 13-ft. (4 m) lead with electrode holder and 25-mm Dinse connector 10-ft. (3 m) work lead with clamp and 25-mm Dinse connector Two contact tips for .030-in. (0.8 mm) wire, and two contact tips for .035-in. (0.9 mm) wire Dual-groove quick-change drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) wire Smith® Argon and AR/CO2 mix regulator/flow gauge with 12-ft. (3.7 m) hose Setup and operation DVD Information/settings chart and quick setup guide Material thickness gauge #229 895 The only all-in-one, portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds (13.2 kg) and running on either 120 or 230 V, the Multimatic 200 can go anywhere you need to MIG, TIG or Stick weld. NEW! Auto-Set™ Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use! Impact-resistant case provides strength and durability, protecting the internal components and welding wire. Note: Shielding gas and safety equipment not included. Optional Spoolmate™ 100 direct-connect spool gun offers a reliable and economical solution for welding aluminum up to 1/4 inch with 4043 aluminum wire. Excellent arc characteristics! Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2. Multi-voltage plug (MVP™) allows you to connect to common 120 or 230 V power receptacles without the use of any tools — choose the plug that fits the receptacle and connect it to the power cord. Optional TIG Contractor Kit gives you everything you need for remote TIG welding with the Multimatic 200. Welder is warranted for 3 years, parts and labor. Gun warranted for 6 months, parts and labor. Miller Electric Mfg. Co. Equipment Sales US and Canada Website An Illinois Tool Works Company 1635 West Spencer Street Appleton, WI 54914 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125 MillerWelds.com

Open the catalog to page 1

Specifications (Subject to change without notice.) 'Sense voltage for Stick and Lift-Arc™ TIG. fif* Certified by Canadian Standards Association to both the Canadian and U.S. Standards. Control Panel Performance Data 1. Process Selection Knob Stick Rod Type Buttons 6. Material Thickness Buttons MIG DUTY CYCLE CHART % DUTY CYCLE TIG DUTY CYCLE CHART % DUTY CYCLE STICK DUTY CYCLE CHART % DUTY CYCLE

Open the catalog to page 2

Genuine Miller Accessories ® Spoolmate™ 100 Series Spool Gun #300 371 Direct-connect spool gun for Multimatic 200 and all Millermatic 140, 180, 211 and Passport Plus models. Handles .030 –.035 inch (0.8 – 0.9 mm) aluminum (4043 only) and .023 –.035 inch (0.6 – 0.9 mm) steel/stainless steel wires. Rated at 135 amps, 30 percent duty cycle. Includes 12-foot (3.7 m) cable assembly and custom carrying case. Bernard® Q150 Replacement Gun Q1510AB8BM 10 ft. (3 m) Shipped with liner 43015. 14-Pin to 6-Pin Adapter Cord #300 507 Adapts Miller 14-pin foot control or fingertip control to a 6-pin plug....

Open the catalog to page 3