video corpo

Dynasty 350 and 700
8Pages

{{requestButtons}}

Catalog excerpts

Dynasty 350 and 700 - 1

Industrial Applications Quick Specs Precision Fabrication Heavy Fabrication Pipe and Tube Fabrication Aerospace Aluminum Ship Repair Anodized Aluminum Fabrication TIG (GTAW) Pulsed TIG (GTAW-P) Stick (SMAW) Air Carbon Arc (CAC-A) 350: 1/4-in. maximum 700: 3/8-in. maximum TIG/Stick Welding Power Source Rated Output 350: 300 A at 32 V, 60% Duty Cycle 700: 600 A at 44 V, 60% Duty Cycle AC TIG Features Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode. Balance control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds. These models provide extended ranges. Frequency controls the width of the arc cone and can improve directional control of the arc. Allows for any input voltage hookup (208–575 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. Meter calibration allows digital meters to be calibrated for certification. 120-volt auxiliary power receptacle for cooling system or small tools. Wind Tunnel Technology™ protects internal electrical components from airborne contaminants, extending the product life. Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine. Dynasty 350 machine only Dynasty 350 Complete Package with Wireless Foot Control Lift-Arc™ start provides AC or DC arc initiation without the use of high frequency. Blue Lightning™ high-frequency (HF) arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Program memory features nine independent program memories that maintain/save your parameters. Auto-postflow adjusts the length of postflow time based on the amperage setting, shielding your tungsten and eliminating the need to set the postflow time. AC/DC Stick Features DIG control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010. Hot Start™ adaptive control provides positive arc starts without sticking. AC frequency control adds additional stability when Stick welding in AC for smoother welds. Advanced squarewave, fast freezing puddle, deep penetration and fast travel speeds. Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action. Sine wave for customers that like a traditional arc. Quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds. DC TIG Features Exceptionally smooth and precise arc for welding exotic materials. Pulse. Pulsing can increase puddle agitation, arc stability and travel speeds while reducing heat input and distortion. These models provide extended ranges. Power source is warranted for 3 years, parts and labor. Equipment Sales US and Canada An ITW Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1
Dynasty 350 and 700 - 2

Specifications (Subject to change without notice.) Welding Amperage Range Amps Input at Rated Load Output, 50/60 Hz 208 V 230 V 400 V 460 V 575 V KVA KW Rated Output Input Power Certified by Canadian Standards Association to both the Canadian and U.S. Standards. All CE models conform to the applicable parts of the IEC 60974 series of standards. *Indicates sense-voltage for Lift-Arc TIG and Low OCV Stick. ™ 9. Amperage Control 10. Encoder Control 11. Ammeter Display 12. Voltmeter Display 13. Memory Display Additional Setup Parameter Values Preprogrammed Starts Dynasty 350 .020 – 3/16 in....

Open the catalog to page 2
Dynasty 350 and 700 - 3

Performance Data DUTY CYCLE Dynasty 350 % TIG Upgrade Chart Which Machine is Right for You? Why Upgrade? Maximum Thickness Capacity High Frequency Arc Starting Start Only AC Frequency Control (Aluminum TIG) Soft Squarewave Advanced Squarewave Soft Squarewave Dynasty 350 Benefits Increases aluminum thickness. Start Only limits HF interference issues. Higher frequencies provide better arc control and faster travel speeds. Advanced Squarewave =Travel faster Soft Squarewave = Maximum puddle control Sine Wave Triangular Wave Sine Wave = Traditional characteristics Triangular Wave = Reduced heat...

Open the catalog to page 3
Dynasty 350 and 700 - 4

AC Waveshape Controls Feature Reduces balling action and helps maintain point Minimum visible oxide removal (etching) Increases balling action of the electrode Visible oxide removal (etching) Wider profile ideal for buildup work Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld. Visible oxide removal (etching) Narrower profile for fillet welds and automated applications Independent AC Amperage Control More current in EN than EP: Faster travel speeds and deeper penetration Bead Visible oxide removal (etching) Allows the EN and EP amperage values...

Open the catalog to page 4
Dynasty 350 and 700 - 5

AC Waveshape Controls (Continued) AC Waveform Selection Select from four different AC waveforms to optimize the arc characteristic for your application. Choose from: Advanced Squarewave Soft Squarewave All the benefits of advanced square, fine tuned to provide a smooth, soft arc with maximum puddle control and good wetting action. (+) Fast transitions for responsive and dynamic arc. Square transitions eliminate the need for continuous HF, while the sinewave peaks soften the arc. Triangular Wave Unconventional wave provides the punch of the peak amperage, while reducing overall heat input....

Open the catalog to page 5
Dynasty 350 and 700 - 6

Machines and Preconfigured Water-Cooled Packages Order machine only or use a single stock number to order a complete preconfigured system. #907 204 001 and #907 101 001 packages shown. Machine Only TIGRunner® Package (Machine/Cart/Cooler) Complete Package (Machine/Cart/Cooler/Torch Kit/Remote) Dynasty 350 (CSA) w/Foot Control Dynasty 350 (CSA) w/Wireless Foot Control Dynasty 700 (CSA) w/Foot Control Dynasty 700 (CSA) w/Wireless Foot Control Comes with: • 8-ft. primary cord (350 model) • Setup video and quick-reference guide • Two Dinse 50-mm connectors (350 model) • Two thread lock...

Open the catalog to page 6

All Miller Electric Mfg. catalogs and technical brochures

  1. TS130

    4 Pages

  2. ED160

    8 Pages

  3. DC296

    4 Pages

  4. AV565

    2 Pages

  5. AY155

    4 Pages

  6. AD73

    12 Pages

  7. EnPak® A60

    8 Pages

  8. SYNCROWAVE

    8 Pages

  9. Fusion160

    4 Pages

  10. LMSW-52 220

    2 Pages

  11. Coolbelt

    2 Pages

  12. Trailblazer

    2 Pages

  13. Live arc

    4 Pages

  14. CP-302

    4 Pages

  15. S-32SL

    4 Pages

  16. Wildcat? 200

    4 Pages

  17. CST? 280

    4 Pages

  18. 70 Series

    8 Pages

  19. R-115

    4 Pages

  20. 22A and 24A

    4 Pages

  21. DC19-8

    8 Pages

  22. AY17-0

    4 Pages

Archived catalogs